Hello everybody 'Lurgs' here welcome to my channel and today it's the Bestway LAY-Z-SPA E02 error and
how to fix it, an E02 error will generally mean that your filter cartridge is dirty and blocked up
and this restricts the water flow being sucked in through the filter so what we'll do is we'll
remove the dirty filter and install a brand new one, but first a few top tips to keep your filter
in really good condition and stop it blocking up quickly! Before anyone gets in your LAY-Z-SPA make
sure they have a shower this washes off any dirt any deodorant, skin creams, suncream things like
that and that makes a real difference, also make sure before you get in your LAY-Z-SPA that you
wipe your feet on a towel on the floor just to get rid of any grit and bits of dirt, and keep
a sieve or strainer handy just to get rid of any surface debris things like leaves dead flies and
long hairs this will really help keep your filter in tip-top condition, and if you've got a floating
chlorine device or a ChemConnect device then make sure you keep the chlorine tablet topped up
there's a link above now about how to use the ChemConnect device, right let's get the dirty
filter removed, first thing you must do is switch off the LAY-Z-SPA spa at the mains and unplug it
and the filter housing on this LAY-Z-SPA is the one at the bottom the one at the
top is the ChemConnect device with the chlorine tablet in so the filter system
is at the bottom so to remove this unscrew it anti-clockwise
and eventually it will just pop away there we go
just drain off any excess water outside
then to remove the lid of the filter housing just unscrew this locking nut anti-clockwise
and the housing just lifts upwards
and there is the dirty filter and that's pretty dirty and you'll find if you've got lots of
people in your house with long hair then that will get matted and stuck inside these rubber
flaps on the inside here so just make sure you pull out any long hairs and any bits of
matting and dirt and grit so just give that a good rinse pull out any matted hair from there
make sure that's all nice and clean that could be a little bit slimy in there now you can actually
clean the filters and reuse them but not forever and there's a link above now about how to do that,
that just saves you a little bit of cash but I'm going to take a brand new filter
and install that in the filter housing so just lay that inside put the casing back on
screw the locking nut back in now all of these are plastic threads so don't try and force it
should just go on very easily if it doesn't feel like it's going on don't carry on forcing it
now let's put the filter housing back on
just line it up nice and parallel and then turn it clockwise again it's plastic thread
so just be very careful if it doesn't feel like it's connecting and going on properly
don't carry on this one's going on nice and smooth you do not want to damage those plastic threads
that is now locked in then remember to turn the power back on and press the orange test
button to get the power back to the LAY-Z-SPA then on the keypad hold the power on button
select your desired temperature this is hard to see but I've set it to 38 degrees centigrade
then put on the heating and the water filtration system and hopefully that has fixed your E02 error
and if you put your hand next to the water heater you should be able to feel the water coming out
if that isn't working you may need to press this reset button
on the side of the heating unit just keep that pressed for a few seconds
if that hasn't fixed it then unfortunately you may have a broken water heater pump time for a brew.
If you found that video useful please subscribe by pressing this button down here if you don't
want to miss more videos on how to save you time and money there's also some other videos
around the edges of the screen if any of those are useful to you, you can select those now. 'Lurgs'.