thank you for watching this DJI tutorial
about intelligent flight modes in this
tutorial will introduce the waypoints
mode first what does the waypoints mode
do waypoints is the intelligent flight
mode that lets you record waypoints to
create a mission when you run the
mission the aircraft will autonomously
travel between the recorded waypoints
this is how you turn on waypoints mode
power on the aircraft and connect your
mobile device to the remote controller
open the DJI Go app and tap enter camera
view to connect to the aircraft
take off the aircraft in pgps mode and
toggle the switch to ethno a
notification asking you if you want to
enable multiple flight modes will pop up
tap to confirm
choose waypoints mode another
notification will pop up saying select
an existing route or begin to record a
new one we will now record the waypoints
for our first mission tap new mission
and a notification will ask you to
report the waypoints max radius 500
meters max path length 5,000 meters
unlike the phantom 2 Vision+ ground
station app the waypoints mode in the
DJI Go app can record the real-time
location of the aircraft fly your
aircraft to the first Waypoint and tap
record c1 and the app will record the
first location and the heading of the
aircraft
navigate the aircraft to the next
location and set it as the second
Waypoint the distance between
neighboring waypoints should be more
than 5 meters please set appropriate
aircraft speed to avoid crash
you can tap the delete' situ to delete
previously set waypoints
when you have finished setting all the
waypoints tap Done the app will pop up a
notification saying fly the aircraft to
the first Waypoint before starting the
mission you can choose between three
modes for the aircraft's heading while
it is running through the mission
consistent with record consistent with
route and free you can also set what the
aircraft will do after finishing the
mission hover or return to home the
slider can be used to set the speed of
the aircraft
press apply after flying the aircraft to
the first Waypoint or confirming that
there are no obstacles between the
aircraft and the first Waypoint
the app will pop up a notification
saying the aircraft will return to the
home point if low-battery rth is
triggered set a suitable return to home
altitude to safeguard your aircraft and
set the default return to home altitude
to 30 meters you can set the return to
home altitude according to the
surroundings and activate the mission by
tapping apply the aircraft will fly to
the first Waypoint and start the mission
you can push the right stick up or down
to adjust cruise speed you can also tap
pause to halt the aircraft
after completing the mission the
aircraft will hover or return to home
according to our prior configuration tap
the star to save the mission to your
favorite missions we use the flight mode
switch on the remote controller to exit
the intelligent flight mode thanks for
watching
you