Hi, DIYers.
This is Michael from AlarmGrid.
And today I'm going to show you how
to upgrade the Z-Wave firmware for your Qolsys IQ panel 2
or Qolsys IQ panel 2 plus security system.
Now the first thing I want to make clear
is that the Z-Wave firmware is actually
different than the system firmware.
If you do a system firmware upgrade,
it won't upgrade the Z-Wave firmware.
You upgrade this separately.
Now the key number to hit here, the key
firmware that you want to hit because you
get some new features that come with this,
is Z-Wave firmware version 6.81.03.
Again, that's Z-Wave firmware 6.81.03.
Now what you get at this Z-Wave firmware version,
you will actually upgrade the Z-Wave security protocol
to S2, which is just a little bit more
secure than the original security
protocol used with the system.
You won't notice any real changes because of this,
but it is something that can be a good piece of mind to know
that your Z-Wave device, your automation devices
are a bit more secure.
The other main benefit you get is
you get to use the smart start feature, which
allows you to scan the QR code for compatible Z-Wave devices.
The IQ DMA is an example of one.
There's a few devices scattered out there
that can use the smart start feature not many devices will
use that feature.
But it can be an easy way to add devices,
rather than doing a traditional exclusion inclusion process.
So that's an option.
And I do want to make this clear when you do this
it's generally recommended.
It's not required, but it's generally
recommended that you completely clear your Z-Wave network
and that that's as bad as it sounds.
You have to go in and remove all devices from your network
and pretty much wipe your Z-Wave network clean.
Meaning you're going to have to go back and enroll
your Z-Wave devices after the fact.
And if you have a large you have network
that can be very time consuming and it's generally
a pain to do.
And to be honest all you're really
getting from this upgrade is the smart start feature,
which is handy but it's not super useful.
And the STP security protocol is nice,
but it's again you're just dealing with automation
devices this isn't security.
It's just things like lights door locks your thermostat.
So if it's not on the top level security protocol
it's honestly not that big of a deal.
So if you have a large Z-Wave network
and you don't want to do this.
It's completely understandable.
This is an optional upgrade.
I just want to make that clear.
So how you know if you need to do the upgrade?
The easiest way to know if your system firmware,
I'm talk about the system firmware now,
was on 2.4.0 or higher when you first bought the system.
Meaning you wouldn't you didn't have
to do any upgrade to get to that 2.4.0.
It was already at least on that firmware version out of the box
brand new then your system has the appropriate Z-Wave firmware
needed and you don't need to do this upgrade.
If you started with a Qolsys IQ panel 2
system that was on 2.3.0 or something lower than 2.4.0
then it's on too low of the Z-Wave firmware version
and you would need to do this upgrade if you wanted
to unlock the smart start future and get to S2 to security
protocol.
And one last thing you must be on system
from where 2.4.0 to get the Z-Wave firmware upgrade.
So if you're not on that high of a firmware
version now's a great time to do a firmware update
for the Qolsys IQ panel 2 plus.
This video's being shot in June of 2020
and I believe the closest is on 2.5.2 now.
So it's a little bit higher firmer
than what the minimum is required
for this Z-Wave firmware update.
We already have our IQ panel 2 plus on the highest firmware
available we did an upgrade yesterday,
but we haven't done the Z-Wave firmware update yet
and we wanted to show you what that looks like.
And I will go into programming here.
So I'm at the main screen and I'm
going to click the small gray bar at the top,
I'm going to choose settings, I'm
going to choose advanced settings,
and I'm entering the installer code which is 1, 1, 1, 1.
And I do want to show you the Z-Wave firmware real quick.
So we can just go to about and we go to Z-Wave.
And you see the Z-Wave version it's 6.51.07
and remember earlier I said, we're
trying to get it onto at least 6.81.03.
So our easy way firmware is not high enough yet
to do the smart start feature or have S2 protocol.
So what we're going to do is we're going
to do the Z-Wave update now.
So I'm just going back to the main screen
to show you from the very beginning how to get there.
And we're at the main screen, and you're
going to do a patch tag process similar to how you would update
the regular firmware, but in this case
you're updating the Z-Wave firmware.
And I also want to--
just a quick disclaimer you should have the battery fully
charged, the panel should be plugged in,
it should be connected with a Wi-Fi network,
if that's not the case, then the update might not go through.
It will take a few minutes for it to go through.
We'll speed it up so you don't have to sit through all of it.
But we're going to go through and do the Z-Wave update now.
So we're at the main screen.
We click the small gray bar at the top,
we choose settings, advanced settings
and we enter our installer code, that's four ones,
and then we go to upgrade software,
and then we click on patch tag.
And now you have to enter this patch tag exactly.
I had it written down here, you enter in zwave that's Z-W-A-V-E
and then 681.
681 and then you can click OK.
And then once I click update using the network,
it's going to go ahead and do the update.
OK, so we click the button and it's
going to check for an update this will a brief moment.
OK, it found the Z-Wave update.
It says that the system is ready to be updated,
and the panel will power cycle meaning
it's going to reboot, shut down, and then power back on.
It's completely normal.
It's going to take a few minutes.
So once you click OK, the updates
is going to be be going through you're not
going to be able to do anything with the panel
during the update process.
So just be patient.
Go get a cup of coffee or something.
And we're going to perform the update.
And it did without me pressing it.
So apparently it likes me enough to update on its own
and it's going to go and do the update now.
[MUSIC PLAYING]
OK, we're back at the Qolsys IQ panel 2 plus security system
now.
And the reboot process completed,
indicating that the update should be complete.
Let's just do a quick check of that.
We'll go in to programming.
So press the grey bar at the top, settings,
it took a few tries there, advanced settings.
Enter user code.
And we'll do our installer code.
And we do about Z-Wave and you see that the Z-Wave firmware
is on 6.8103, which is the Z-Wave firmware version that I
talked about earlier.
So now we should be on S2 security protocol
and we should have the smart start
feature let's just take a quick look to see the smart start
feature.
OK, we're back at the main screen
will choose the gray bar at the top, settings,
Enter user code.
And we'll do our installer code.
And we're going to go to installation,
and we're going to go to devices,
we're going to choose Z-Wave devices,
and you see that we have the light bulb right there
for the smart start feature.
And we're going to be showing that feature off
in a different video, but that is how you upgrade
the Z-Wave firmware for your Qolsys IQ panel 2
or Qolsys IQ panel 2 plus security system.
If you found this video helpful, give it a thumbs up
bellow to like the video we always appreciate that and make
sure to subscribe to our channel to get updates
on future videos.
And if you have any questions about the Qolsys IQ panel
2 or IQ panel 2 plus or about alarm monitoring in general,
feel free to email us at support@alarmgrid.com
we're always happy to help hope you enjoyed video.
Thank you.