Hello everyone welcome Retwisst channel!
Today I will describe how to knit pouf kit.
Let's look at the materials
3x Retwisst T-shirt yarn, 1x 10 mm needle, 1x liner and 1x lining lace.
Also, there is a pattern inside.
You can find every step in the pattern.
Cast 46x loop on your needle.
Leave 3m of rope. Create a loop like this where the 3m is.
Thread the loop through the needle and secure.
The short side of the yarn will be on the outside and the long side towards me.
I leave my index and thumb between the two ropes and lift them upwards.
Pass the yarn on your thumb to the needle. Take the yarn from your index finger on the needle and pass it between your thumb.
This is how we will loop. Let me show you again.
I leave my index and thumb between the two ropes and lift them upwards.Pass the yarn on your thumb to the needle. Take the yarn from your index finger on the needle and pass it between your thumb. 46x loop in total.
46x loops are ready.
We will use the short remaining yarn to sew the mouth of the pouf.
Here we will knit garter stitch from one direction.
Thread your other needle into the first loop. Wrap the remaining long yarn over your needle and pull it out through the loop to the back.
Continue knitting gather stitches until the end of the row.
In the 3rd row, continue to knit gather stitches until 5x loops remain at the end of the row.
Take the first of the 5 loops on your needle without knitting.
Throw the yarn back and turn your needles upside down.
4x loops are left on the right needle.
Take one loop without knitting it again.
Continue to knit gather stitches until 5x loops remain at the end of the row.
Take the first of the 5 loops on your needle without knitting.
Throw the yarn back and turn your needles upside down again.
Take one loop without knitting it again and contunie knitting.
Continue to knit gather stitches until 10x loops remain at the end of the row.
1,2,3,4,5....,10. Take one loop without knitting
Throw the yarn back and turn your needles upside down again.
Take one loop without knitting it again.
Continue to knit gather stitches until 10x loops remain at the end of the row.
Again, take one of the 10x loops to your other needle without knitting.
Throw the yarn back and turn your needles upside down again.
Take one loop without knitting it again.
Continue to knitting until the end of the row without leaving a loop.
7th row finished. In the 8th row, continue knitting until the end of the row without leaving any loops.
Continue knitting gather stitches.
8th row finished. In the 9th row, continue knitting until 5x loops remain at the end of the row.
Model bu şekilde oluşmaya başladı.
We are in 9th place. Here we leave 5x loops. In the 10th row, we will again leave 5x loops.
10x loops in 11th row, 10x loops in 12th row. In the 13th row, continue to knit gather stitches without leaving a loop.
We go back to the beginning and continue to do the same steps in the same order. 5x loop,5x loop. 10x loop, 10x loop and there will be 70x row in total.
Now slip stitch the loops. For this, knit the first two loops.
For this, thread your needle into the first of the two loops we knit and cast off the loop from the second one.
Knit 1x loop again and do the previous step.
Thread your needle into the first of the two loops we knit and cast off the loop from the second one.
Do this until the end of the row.
After finishing the row, when there is only one loop left on your needle, knit one loop and finish the row.
You can cut your yarn leaving this distance.
Fold your puff in half.Take your long remaining yarn and insert your needle.
Pass your yarn through the loops at the beginning of each row in this way.
In this way we pass the needle and collect the loops.
Pass the needle through the last loop and pull the thread to pucker the mouth.
After puckering the mouth part, pass the yarn in the same place to fix it.
Secure the yarn by threading it through the loops again in this way.
In this part, we will stitch the yarn by passing the yarn between the loops.
Continue sewing without over-tightening.
Don't sew the two loops at the end of the row.
Measure for the lining.
Cut the lining so that 2 pieces are 1 m length and 75 cm width.
We will sew 2 linings from the shortest edges.
Sew this way to the end of the edge.
We will pucker the mouth part as in the puff. So we pull the yarn from both sides.
Sew here to secure it.
Sew one stitch, again threading into the same spot, to secure.
This is how we sewed and puckered. Now let's sew the other side.
Sew the other long part in the same way.
Turn the lining inside out after sewing both sides. The stitches will stay in.
Hold the puckered part of the lining and slip it into the puff.
Slip it into the puff like this. Leave the long part out of the puff.
I'm going to fill the puff with the sponge scraps I have. You can fill it with fiber if you want. Then sew up its mouth and pucker.
This is how I filled the liner of the puff and closed its mouth.
Thread the yarn through the loops at the beginning of each row.
When you reach the starting point, pull the rope and pucker the mouth part.
After tightening the yarn well, take the short yarn and tie the knot.
Cut the remaining yarns after the knot and hide them towards the inside.
Your puff is ready. I hope I was able to help you. Don't forget to follow and subscribe to our channel for different knitting models. Goodbye.