Hi, guys. Kirk and Jason are here with Kirk Giordano plastering, Today I got some tips on
lathing, two weeks ago we did a video we showed a lot about vents, and why to use louver vents,
a lot of people correct me because I said Louver and they all said like your brother, Louver,
Louveler vents, and so on and so on I had so many responses that a lot of other people asked me
other questions like Kirk, what kind of paper to use what gun are using? things of that nature, so
I'll point out real quick. Generally, we're using a jumbo tax jumbo Tech, make two layers of papers
And this is spot glued, but it's it's two layers one-two that's code, guys you got to have two layers it's
A 60-minute paper, they're guns were using, I like to use, Senco. Like these Senko;'s, this is a 200 X P. I believe it is,
200 X P. This is a lathing gun. L, a ,t, h, I, n, g. lathing. Not lathe, that's lathe. Lathe machines you
carve wood out of, and spins it. You could also use a Senoco 150 XP and that's for roofing as well as
stucco or lath wire. This is the netting.
Blam, this is the netting we use now what kind of netting is this? They have 17 and 18-gauge both will work guys. And there's only one way to put this on, you can
put it on backwards and most of the people who we come and we do work for I'll get there I'll
say, what do you guys lathed this whole garage or this whole house backward, and they go what do
you mean? Where it curves out, this is how it's supposed to go on, because it's furred, I'll show
you when we get to the side it's furred meaning the fur goes here and it pushes it out kind of
like Dobies, it that way the stucco can get under and over so it's in the middle not just if you
put it this way, the fir is useless, and it just makes the stucco um bit weaker.
Anyway I'm gonna get back to the fellow who says, gee he has asking me about corners reinforcing corners with paper
you guys can do this to, what we generally do is we'll put our paper this way will come across
six inches, then we'll put a piece this way and come over this way six inches so that the corner
is double-wrapped. What we did here is we just put some this peel and stick and right here where the guy got cute, and he put a copper Z flashing you can do that, but it you don't really have to, but
if you do, do that, then we have got to avoid the electrolysis now, electrolysis, is the this one
this flash in here is galvanized, so you can't put galvanized over copper electrolysis, one will fail
and you can bet it's, the galvanized will fail, before the copper, copper will eat right through
it you know 100 years, like we're gonna be here that long. but we're longevity we have to go by
the rules, so what we've done is I put a piece of this peeling stick over the copper flashing and
now we put here this paper goes this way we're gonna tack this down and then use the wire but
why don't we go over here and I'll show you what how we staple this off this 200 X P just load the
staples like that and how long are the stable staples are here inch and a quarter Y 7/8 of
the leg has got to be in the stud so I have to account for the sheer wall or the plywood sure
wall and plywood is a bit different so got to make sure we got it right all right let me give
myself some hose and I'll show you a couple more tips and by the way guys that video I was
talking about where I got so much response from homeowners I said Jake Kirk can you do a few more
on the laughing go more into detail so what I'll do is when I'm done with this video if you scroll
down into the description I'll put the other video in which has a lot of other tips for you folks who
are doing remodels additions add-ons whatever you want to call them extensions garages whole
houses now what we do is here's our paper this is to apply paper to apply jumbo text all right
we find the studs studs are every 16 inches guys on no matter if it's a house or garage so once
you found one stud I can use my gun right here and boom I'm almost 16 I like I don't even have
to market but I mark it in red and we mark it basically in yellow that's what these crayons
for that way you can see the yellow on the black especially when you're doing your staples every
six inches you're just into a further I'm kind of going into a fur guys that means I'm not in the
field we're going to talk about in the field in a second for the sake of another question they said
should you put a staple right in here sometimes if it's if this is sticking way out we're stuck
is only a inch thick 7/8 technically if it's sticking way out like like that and you know
you're going to put the stucco on and the wires gonna be too far out you can go in the field it's
not gonna hurt anything I'll show you something else too okay we got corners we got wire itself
furred it's the right way when we get ready to do this guy's in another week we've got a cool thing
to show you guys how we apply it it is really cool so not this week but the following week J
will take that video and upload it we're going to be doing this is a tiny garage guys we're going to
be doing that and we're going to be doing here of course we've got one other side over on the
there plus the front again when we get ready to apply this plaster we've got a couple machines
that artists are so much state-of-the-art and new and get this they run on 110 you guys there
what the heck is that most machines run on 220 in their nightmares to use because I can't find 220
I once I had to send a whole crew home because I couldn't we couldn't hook up to 20 and I had
electrician with me so couldn't do it anyway next week we're gonna show you a simple way and this
is for your contractors homeowners you probably won't well need the machine but contractors this
machine I'm gonna show you soon you're gonna look how you're gonna say wow I'm gonna get me
one of those and they sold all over the place - especially at Westside building materials
and another plastering yard anyway guys my name is Kirk Jason on the camera as usual live long
and plaster by the way folks my dad and I are now members of Amazon affiliates so if you're looking
to buy any of the plastering or construction tools you've seen in our videos and you want to support
us in the process you can check the links below our video or you can go to our website and get
them there if you have any other questions that for tools we don't have linked email us direct
and we'll respond to you then once again folks we thank you for watching and I really enjoy all your
comments if you guys like this video please click the like button down below and also if you enjoy
what we do subscribe to our channel so we can keep making these videos for you my name is Kirk
and Jay we thank you for watching and from the entire giordano family we'll see on the next one