Set up the HP LaserJet M14-17 or M28-31 printer on a wireless network from an iPad or iPhone.
If you previously connected a USB cable to your printer, disconnect it.
Turn on the printer you want to set up and wait until it is idle and in a ready state.
On the printer control panel, press and hold the Wireless button for twenty seconds.
When the Attention and Power lights blink simultaneously, release the Wireless button.
All printer network settings are restored to factory defaults.
With the settings restored, the printer restarts automatically.
On an iPad or iPhone connected to the network in which you want to connect the printer, go to 123.hp.com.
Tap Get the App and then follow the prompts to install HP Smart.
Open the HP Smart app, tap the check box to agree to the terms, and then tap Start.
The Welcome screen only appears the first time the app is opened.
If prompted, tap Allow to enable notifications from HP Smart.
Tap the plus sign, then Add Printer, and then Set Up and Add a New Printer.
To connect the printer to the network,
you must make a connection between the printer and your iPad or iPhone.
Open the iOS Settings, and then select Wi-Fi.
In the list of detected networks,
connect to the network that has HP-Setup and your printer model in its name.
Return to HP Smart and the app connects to your printer.
Follow the instructions to connect the printer to the network, including adding any network
password or passphrase, if necessary, and then tap Continue.
The app finds the printer, configures it for a wireless connection,
and then connects it to the network.
With the connection complete, tap Continue.
With the printer connected to the wireless network,
reconnect your iPad or iPhone to your wireless network through iOS settings.
Once reconnected, the app verifies the printer has been successfully set up on the network.
If a Cannot Obtain Printer Details screen displays, simply tap Skip to proceed.
If your printer hardware has not been set up,
follow the instructions and videos to install the toner and paper in your printer.
Continue following the prompts and adjusting any settings to finish setting up the printer in HP Smart.
With the printer setup complete, try to print from your iPad or iPhone by tapping Print a Document.
Follow the instructions, adjust any desired settings, and then tap Print.
The document prints over the wireless network on your LaserJet printer.
The printer is ready for printing and can be set up on other devices.
To confirm the wireless settings and to assist in setting up other devices,
print a Configuration Page from the printer control panel.
Press and hold the Start Copy or Resume Cancel button.
When the Ready light blinks, release the button and a Configuration Page prints.
The Configuration Page displays the settings for your printer, including the IP address
which can be used to set up your printer on other devices.