- Hey guys, Shawn again,
Custom Offsets, Custom Offsets TV on the Youtube.
It is Raptor Week.
We got their 20 by nine's, we got their 20 by 10's,
we got their hot wheels, we got their new wheels,
we're gonna show you all the specs on them,
Stancy's gonna come back,
we're gonna show you some of those wheels,
so make sure you tune in, make sure you subscribe.
Peace.
(heavy metal music)
Hey guys, Shawn again, Custom Offsets, Custom Offsets TV
on the Youtube.
We're gonna keep going with Raptor Week.
I have no idea what this wheel is.
It is the the Indecent Exposure 311,
which we Googled and we're starting to believe
that the model numbers are the same
as the call names for the violations.
Which is pretty funny since they're supporting
our Raptor support the police shirt.
This is the, what did I just say, Criminally Insane?
- [Junior] Indecent Exposure.
- Indecent Exposure.
I get all my felonies confused, Junior.
20 by 10.
So this one's gonna be the negative 22 offset.
Raptor is doing something right in between
the typical negative 18, negative 24,
and they're doing a negative 22 offset on their 10 wides.
What that's doing is creating a pretty decent,
this isn't going to be a lip wheel,
as you can see, this one doesn't really have much of a lip,
it's more what we call a concave wheel.
So what I always try to measure is how deep is that thing,
because the guys that wanna run the concave wheels,
typically are trying to see how much concavity they can get
off the face of the wheel,
and I would say that's right around four and a half inches.
Which is obviously a tricky measure to actually call.
I'd say it's closer to five actually,
if you go all the way to where the lug nuts bottom out.
So it's probably about five inches of concavity.
It is a pretty deep wheel.
You can see it's a pretty typical five star,
as far as the overall design,
but then they've added in all of these grooves, that again,
and we're seeing this with all the Raptor wheels.
There's plenty of room in there to get a rag in there,
so cleaning them should be pretty simple.
And then the overall finish of this one is a matte black,
And then all the way around
they put in some actual chrome rivets,
all the way around on these bump outs,
and then on the blades as well.
So you can see the center cap is also a matte black.
It's a much larger cap on the concave one,
and then they've got the chrome R for Raptor.
Then you can see the hardware is typical stainless,
that just pops a little bit too.
So, overall a matte wheel with some small chrome accents
is the look that they're going for, and then like I said,
these deep grooves that are cut in there,
that make it stay pretty simple to clean.
And as far as reaching inside of here, on concave wheels,
because the wheel is upfront,
you have this massive area on the backside of the wheel
that typically you have to be able
to reach in there and clean,
and this one is definitely one
that you can get your hand inside of there.
The other size that one comes in,
this is the only finish that this one's coming out in,
at least so far.
Based on popularity, a lot of times what you'll see is
wheel companies will release more and more sizes,
if that wheel's doing well.
So this one today, starting off,
the matte black is the only finish,
and then it's coming out
in the 20 by 10 negative 22 like this,
and then also the 20 by nine plus 13.
So this one, the 20 by 10 negative 22, as we always say,
is a good leveled pickup truck wheel,
and then that 20 by nine plus 13
should run a little bit inside of flush,
and that's a good stock suspension wheel,
when you start running 31, 32 inch tires,
and then this one, with leveled trucks,
you can typically go all the way up to 33 inch tires,
and even in the Dodge world you can get in the 35's
and still get it to fit.
But overall, it's a very typical concave five star,
which is good because a lot of companies will run
a bread and butter five star wheel.
And then what they really went for was how short they went
with the concavity, and then also engraving their name
right in one of the spokes.
So, keeps it as a clean wheel.
You can see it's got exposed lug nuts all the way around.
And the price point's pretty much the same thing.
It's looking like all the Raptor wheels.
You're talking about 921 for this 20 by 10.
Shipped to your door, for all four of them,
they're about 800 bucks.
For the 20 by nine plus 13, for 801, shipped to your door.
So, very competitive, good price point wheel,
and like I said, you know, it's a good looking five star,
as far as the concave look truck wheels go.
So I think a lot of Dodge and Jeep guys are running wheels
like this, of this design.
That is the Raptor, tell me again,
Indecent Exposure, Junior?
- [Junior] Yep.
- And that's, I believe, all I know about that.
It is Raptor Week, so we're gonna keep them coming at you.
We got five of them in total to show to you.
Some of them are totally different finishes and models,
and some of them are just different sizes.
We'll show you a different lip size and what not.
So make sure you subscribe, make sure you share,
make sure you stay up with us this week,
cause it's Raptor Week.
Peace.
(hip hop music)