hi my name is Marc Spehalski senior engineer at VoIP supply today we're
going to talk about the Adtran total access 908e VoIP gateway there's a
lot of things this PSTN gateway can do but today we're going to use it as an fxs
gateway to talk to our renegade mini PBX let's take a look at the back we have
our 25 pair Amphenol connector this device only has eight fxs so when the
first eight pair will be active there's an optional fxo lifeline which this one
doesn't have we have 4 ports to 10 100 Ethernet a Gigabit USB port console
cable battery backup port in the power to use this as an FXS VoIP gateway we'll use
one of these a 66 punch down block so connect it to
the Adtran plug in your ethanol cable into the ethanol port on the Adtran
now we'll punch down the analog phone to the first pair on the 66 block will
connect our analog phone to the first pair on the 66 block the first pair is
the top two pins on the punch down always make sure that yellow is your cut
side we always cut down
next we'll plug in our power in our network cable and we'll go straight into
configuration I'll use one of the Ethernet ports and are ready to go first
we'll build an extension in our renegade mini PBX running FreePBX that the
analog extension in the Adtran Total Access 908e will register too so let's build an
extension
next we'll create this same user in the Total Access 908e
we will set this as an analog station on FXS 0/1
next we'll go the SIP trunk that points to our VoIP phone system
there will be no registration details because this is not a registration SIP trunk
next we'll create a trunk group
at our trunk is a member
and build a dial plan towards the SIP PBX
we want the add delete permit templates will use 2xxx
next we'll go back into our user account and register to our IP phone system
to VoIP settings
at SIP identity
select the trunk
enable trunk registration
enter the SIP credentials for the extension
we'll use the pre-generated SIP password
hit apply
we can check our registration status by cooking on trunk registrations we can
see that our extension is now registered to our IP PBX the now we'll test dialing from
our analog extension to the renegade mini PBX
so first let's create a destination on the PBX for this example we'll use a
conference bridge
next we create an inbound route
we'll leave this as any DID any caller ID
now we'll place a test call from analogue phone to the conference bridge
as you can see it's pretty easy to use the Adtran Total Access 908e as an
FXS gateway additionally through a lot of other features we didn't go over
today for a full list of features visit it on our website at VoIP supply.com
once again my name is Marc Spehalski senior VoIP engineer at VoIP Supply
thanks for watching VoIP supply is a leading internet
retailer a voice over IP Hardware with over 125,000 customers worldwide click
subscribe to stay up to date on the latest from VoIP supply and VoIP
technology thanks for watching