Hi, I would like to show you now how you can
maximize fire safety for small applications with our new Cerberus FIT.
Now when we talk about small applications,
what we mean with that is for example a small kindergarten,
a school, a small hotel or office building,
but also of course a nursing home,
so all these small applications where there's a lot of people involved,
so you have a lot of people that need protection,
but oftentimes these kind of applications don't require
by law to be protected by a fire system,
but with our easy to use fire system you can target
especially these kind of applications
and protect them in the way that really ensures
that in case of a fire all the people in your building are safe and secure.
So when looking at these applications, then three things are important:
the system has to be simple and it has to be reliable
as well as fast and it has to be an open system.
I would like to explain to you how Cerberus FIT
actually meets all of these requirements.
Now when you look at our fire control panel the FC 361 here,
it's so easy to engineer and to Commission that any fire safety engineer,
any installer that has the certification can quickly do a tutorial
learn it in 2 hours and then he can install and Commission the system.
So it's very easy to use and it's meant for small applications,
so the capabilities of the system are that you can have
one loop connected with up to 126 devices.
Our detector range includes multiple different detectors,
depending on the requirements of your building and your rooms,
so for example we have here a multi-criteria detector
that combines heat and smoke detection,
but also a pure heat detector as well as a smoke detector.
Now on top of that, we also offer ASA detectors
that combine normal detection with advanced signal analysis.
On top of that, we of course also have a wide range of alarming
and evacuation modules and peripherals that you can use.
So for example, here you see our alarm sounder as well as our IO module,
which allows us to also talk to third party systems.
So what we can also do, for example, send the signal to a fire door
as well as the ventilation to turn it on-off, open or close the door,
depending on the needs of the building, and like this we can really interact
with all kinds of different third party systems
by sending them the signal that there is a fire now.
Of course, what we also have, is the manual release of a fire,
so if you would press this button, the whole system goes into alarm.
Now when we look at the system as a whole, of course,
what I said in the beginning, what is important is that it's really simple right,
so of course the installation for all fire systems is fairly the same,
but in the commissioning process, when you plan the system,
when you check kind of how long does it take
to actually make sure that the system is running,
this is really a unique system because with the Press of two-three buttons
the system automatically configures itself,
so it reads all the devices on the loop and it's already fully functional.
Now on top, if you want to include some controls, you want to,
of course, send signals to third party systems with an IO module,
or you would like to have different zones
where the system reacts in different ways,
these kind of things can also be configured.
Now the wonderful thing about our system here is
that you don't need a separate engineering tool,
the only thing that you need is
you connect your laptop via Ethernet cable to the panel
and this allows you then to use the configuration tool
that is on the panel itself and this allows you
to really have an easy access to the system
and also makes sure that anybody can service the system
so you're not kind of caught with licensing
or you have to use a specific supplier and service technician,
but it's really an open system that anybody can service,
which makes of course the lifetime costs for you
a lot lower than in a normal fire system.
What you can also do, if you have a very complex configuration
because you have a lot of controls that you want to address,
you can also download the configuration onto your laptop
and use our additional desktop editor to do the changes that you require
input customer text or whatever your needs are,
and then do these things not at the panel but do it at your office wherever you want
and then you come back plug it in upload the configuration and everything works.
So as you can see the system is really designed
to be simple open and intuitive in using it,
but at the same time we don't compromise on safety,
so for us it was important to make sure that even though
the whole system is very simple to install and Commission and maintain
that safety is not compromised, so how we do this is:
that all these devices are actually devices from our pro portfolio,
so for example what we have each device includes a turbo-isolator,
so this means in case of a fault the loop
will be divided into two different zones,
so that you make sure that everything still works according to plan
and that even in case of a failure of one device the rest of the devices
still work and can safely protect the people in your building.
Get in touch with us to get more information
and understand how Cerberus FIT can really protect
the small applications that you are managing.