- Hey, what's up guys?
And welcome back to a brand new video.
Today, we have something pretty awesome.
We have this pretty cool looking Tesla right here behind me.
And if you guys saw our previous video
you may have seen Henry give it a nice deep wash.
Upon him finishing washing the vehicle,
we pulled it inside the Detail Garage.
We checked it out with our ultra bright inspection LED light
and the paint is absolutely trashed.
So, today I want to show you guys
how to easily remove that
and get your paint looking as good as new
using our two brand new products
C4 clearcut correction compound and
P4 precision paint perfection polish.
So stay tuned.
I'm gonna show you guys how to do that right now.
All right guys, so before I actually begin
working on the vehicle
I wanna give you guys a quick little breakdown
of everything that I have right here in front of me
just so that you guys can better understand why
I have all these products right here.
So the first product is gonna be our pads.
Now, I'm gonna be utilizing the Orange Hex-Logic cutting pad
with a White Hex-Logic polishing pad
in combination with our C4 and P4 product.
And I'll break down those in a little bit too.
But before I get there
I do wanna break down that.
You know, we are gonna be Clay Luber in the paint.
So, you know, whenever you polish
or whenever you do anything on your vehicle
you wanna make sure that it's completely contaminant free.
So we'll be using an OG Clay Bar
pair with some Clay Luber
to remove those embedded contaminants
so we get the best results.
And then to follow it up, whenever we start polishing
we're gonna be using our Pad Conditioner
which as you guys know, you know, you wanna make sure
that you using Pad Conditioner on your pads
before you start polishing to have the best outcome
and to have the smoothest application.
And then, we have our C4 and P4 polish.
Now C4 is our newest compound, which cuts consistently
which is gonna give us the results
that we're looking for.
So C4 is a super easy to use consistent compound
that's gonna remove all those heavy
to medium scratches, swirls and oxidation
that's on the paint,
along with anything, you know, superficial
such as lighter scratches, water spots and stuff like that.
So we're gonna be using that
in combination with their Orange Hex-Logic pad here.
And then we have our P4 precision paint perfection polish.
Now, the reason that we're gonna be following it up
with P4 and having this two-step combination is
because we're gonna use the power of C4
to cut through those scratches really fast
and then use the power of P4 to refine the paint so
that we have the best clarity and the best shine possible.
And then finally,
I'm gonna wrap it up by wiping it down with some wipe out.
Now, if you guys don't know what wipe out is,
wipe out is a surface cleanser.
Now, one of the great things about these products
is that they're water-based so they contain no fillers.
So the reason I'm gonna be using this at the end
of my polishing process is to wipe down the paint
so that you guys can see that there are no fillers
in the paint, which is given it the, you know
the appearance of a better looking shine so
that you guys can see the raw paint for what it actually is.
And we're also gonna be using it to remove any kind
of residual polish
and compound that's left behind on the surface.
And then the last thing here
we have some green workhorse towels
and we also have our TORQ 15DA polisher.
Now I'm using the TORQ 15DA because as you guys can see
the Tesla does have a ton of white and broad areas.
So we wanna go ahead and use a wide throw polisher
such as the 15 to get the best coverage
and the least passes as possible.
So now that I've broken all this down
I'm gonna move over to the car
and then show you guys how actually
work all these products.
So we're right here in front
of the Tesla right here on the hood.
As you guys see this thing is massive.
So the first thing that we wanna start off
before we start polishing anything, we wanna
make sure that the surface has completely contaminant free.
So how do we do that?
You may ask, well
we have our Clay Bar here.
Now, right here I have our OG Clay Bar.
Now, if you guys hear this very carefully
you'll hear that, you know, the contamination
you may not be able to see it on dark vehicle like this
but on a white vehicle or a lighter color vehicle
you'll start seeing like smaller brown yellow specs.
So if you guys were wondering what those were
contaminants that are embedded in your paint.
In this case, you really won't be able to see it
cause it's a darker color, but you can hear it.
So check this out.
So that's small little raspy noise that you hear.
That's embedded contamination that's on your paint.
Your paint should not sound like that.
It should be completely smooth
and you know, should not make any noise whenever
you hover your hand over it.
So, the way we're gonna be removing it today
is going to be using our OG Clay Bar.
I have myself a small little piece right here
and some Clay Luber.
You wanna make sure that it's always lubricated
whenever your clean because the last thing that you wanna do
is merge the paint with your Clay Bar
as you're working on the surface.
So in this case what you want to do
is spray your Clay Luber directly onto the surface.
I'm going to move my towel here just so I don't get a wet,
spray the surface and remember,
you wanna make sure that you have enough lubrication.
So whenever you using a Clay Bar, you wanna make sure
that the surface is completely lubricated so
that your Clay Bar gently glides from left to right.
Don't go in a circular motion.
Don't put pressure, just glided left and right.
You don't have to add any pressure to it.
And you'll start feeling it a little bit rough
whenever you first started doing it.
And as you work, the Clay Bar, you'll gradually
just get smoother and smoother and smoother.
And once it's pretty much gliding on, on the surface
you can pretty much move on to another area of the vehicle.
So in this case, you know, the hood isn't actually too bad.
So you know, this
that's a great thing that we don't actually
have to spend too much time Clay Barring the vehicle.
So I'm just going to pretty much wrap up this hood here.
I'm going to Clay Bar the rest of the hood
and be back with you guys once I'm done.
All right guys.
So I just finished wiping off the clay lubricant.
after Clay Barring the hood here.
Now the next thing that I'm gonna do is I'm gonna tape
down the hood right down the middle
so that you can see a clear distinction
between the side that has not been polished
and the side that we are going to be polishing.
So I'm just gonna be using some masking tape.
Masking it right down.
So give me a second,
let me do that real quick.
And I'll be right back with you guys.
So now that the hood is masked off with the 50 50,
now it's time to begin.
So I'm gonna grab my Orange Hex-Logic cutting pad
and I'm gonna slap it onto my TORQ 15DA polisher.
Now, whenever you put your pads onto your polisher
you wanna make sure that you do your best to center it
so that you have the most consistent cut
throughout your vehicle.
So now that that's centered nicely
then you're all good to go.
Now the next thing that you wanna do
is grab your compounds.
So I'm gonna grab our C4 clear-cut correction compound
and I'm gonna apply about five P size drops
to my five inch pad.
That's usually the rule of thumb, you know
depending on the size of your pad
if you have a four inch pad, four drops
you have a six inch pad, six drops and so forth.
So I'm gonna grab my C4
and I'm gonna put about five drops onto my pad here,
two,
three,
four and five, close that up
set my bottle down.
And I'm actually gonna set it down on the ground,
just cause I know it's gonna hit the bottle right here
when I'm polishing this area.
And then I'm gonna grab my pad conditioner.
Now with pad conditioner, you don't have to go crazy.
All it takes is a light little spritz
to condition your pad, just check it out.
That's all you need.
And your pad is now conditioned.
So I'm going to set that down
and now I can actually begin with the polishing process.
So what I'm gonna do right now is I'm gonna blot out
the product onto the hood.
I'm gonna work in this little section right here.
And then what I'm gonna do is turn on my machine
to speed setting one, to work it into this little area.
All right so now that I've worked in the product
on speed setting one
now I can finally work it.
So what I'm gonna do now is I'm gonna turn my machine
onto speed setting six,
work it until it completely breaks down.
You know, whenever you see the product kind
of become a little bit more clear, then you'll know
that it's time to wipe it off.
So now what I'm gonna do is I'm gonna turn on my machine
to speed setting six and work the product
until it completely breaks down.
And one of the great things about our
C4 clearcut correction compound is that it utilizes
our consistent cuts technology.
So it cuts and maintains the same cut from point A to
point Z.
So wherever in this little section that I'm cutting
with my C4, I'm gonna get a cut just to cut
throughout the whole thing due to our develop nano abrasives
that are in this product, which work out phenomenal whenever
you're working on a vehicle like this,
because you know you never know when you need to stop.
As far as like, you know, the scratch, this was a chip on
your paint, it's great to know that having a compound
that has a consistent cut will give you the same result all
around your vehicle.
So now I'm going to turn on this machine to
speed setting six, work it and be back with the you guys.
Show you guys the results.
All right guys, so now that we're done with the first pass
with an orange pad and C4.
Now it's time to wipe out the product
and check out our results.
So I'm just gonna grab my microfiber towel
wipe it off and let's check it out.
So now that we're done wiping off the product
I'm gonna peel my tape just a little bit
from the top over here to show you guys
the cool little 50 50 result of just using C4
by itself with an Orange Hex-Logic cutting pad.
So as you guys see the right side
you have a lot better depth, a lot better clarity.
And honestly, for a one-step product like C4
with the orange pad, you can see
that it does an amazing job on its own.
However, like I said, we are going to follow up
with the P4, just to make sure that we refine the paint
make sure we get the best finished possible
and the best clarity possible.
So check that out you guys,
huge difference.
That's just using C4 with an orange pad
and the TORQ 15DA polisher.
So incredible results as a one-step.
And like I said, we are going to follow it up right now
with the P4 as a two-step.
All right guys, so now that I have
my White Hex-Logic polishing pad
on my machine, I'm gonna now grab my
P4 precision paint perfection polish.
Now, after we have hit the paint with the C4
now I'm gonna follow it up with the P4 to refine the paint
and give it the ultimate clarity.
Now, P4 is developed with our ultra fine abrasives
which means that it's gonna refine any kind
of micro scratches, marring, swirls or anything
like that on a microscopic level
so that you have the ultimate paint finish.
So if you're looking for that ultimate shine
then I would highly recommend hitting it
with some P4 and a white pad to achieve those results.
So what I'm gonna do right now is I'm gonna wrap
up this paint right here by polishing it with the P4.
So with this thing, I'm just gonna apply the same number
of drops that I did with the C4.
I'm gonna put about five P size drops,
set that down
and now I can begin the polishing process and we're going to
mimic the exact same thing that we did with C4,
blot it out spread it out on speed setting one,
turn it up to speed setting six
and working until it's fully broken down.
So I'm gonna do that right now.
And I'll be back with you guys with the results
All right guys, so now that I'm done polishing
I'm gonna set my machine down real quick.
And now I'm gonna grab my Work Horse Towel
and simply buff off the excess of the product.
Now check out the amazing shine that delivers.
So once wipe off the product
you'll finally see your final result
of what your true paint should be looking like.
Now right away I can tell you guys that this
thing looks a lot blacker.
It looks a lot more aggressive.
And the paint just looks a lot more awesome.
You know, the depth, the clarity, the sparkle
everything looks way better right now
without even having to remove the tape
from the left side that has been unpolished.
So that looks great.
I'm done wiping off the product here
and now what I'm going to do is finally
remove this tape here
and show you guys the final result.
So if come close over here
you'll see the paint is immaculate.
You know, the sparkle is fully there.
You have that 100% clarity.
And then we come over to the left over here
and you have a ton of scratches, swirls
and you don't have the ultimate clarity that you do have
on the right side.
So, you know, not only just removing the scratches
and swirls on your vehicle
but whenever you do compound and polish it with C4
and P4 you'll reveal the ultimate shine.
All right guys
that pretty much wraps it up for the Tesla.
As you guys saw,
just choosing the right products, C4 and P4
we were able to achieve the amazing results
that you guys just saw.
So if you guys want to achieve these results
on your vehicle, make sure to visit our website right now
ChemicalGuys.com to pick up your bottle of C4 and P4 today.
And if you have one available near you
then you can also swing by your local Detail Garage
to pick up these products.
If you guys liked this video,
make sure to give us a huge like,
comment down below your rating
for the incredible before and after that we got
on this Tesla and as always, my name is Joey.
This is Chemical Guys Detail Garage.
I'll see you guys time.