This is the World's 1st Apple-Certified 6-in-1 MagSafe Charger with GaN and it is from ESR. This
powerful charging station can power all of your Apple devices like your iPhone, your apple watch,
airpods and just about anything else you can think of with the included USB ports.
So let's take a look at the new ESR 100W Charging station with MagSafe and Cryoboost!
ESR is sponsoring this video and they sent this out to me so I could show
you everything it can do, which is a lot! Just looking at the design of this charger,
it is impressive. This is a very clean and modern design with aluminum stands
for the watch and iPhone. There are non-slip pads on the bottom to keep the
charger in place. We can see 3 usb ports on the side and power input on the back.
What's really nice about this 6-1 is that there is no external power
brick needed. All of the charging power is built into the stand itself making
it easier to plug into tight spaces near a desk or even your bedside table.
Let’s start with iPhone charging…..
With many wireless chargers for the iPhone,
you will find that they are not MagSafe certified by Apple which means they can't
charge at the full 15 watts. Many of them only charge at around 7.5 watts maximum
The ESR 6-1 Charging station includes MagSafe, fully Apple-certified, and can charge any MagSafe
compatible iPhone 12 or later at up to 15 watts. But, only the ESR 6-1 with MagSafe can charge
OVER 2 times faster than the official apple magsafe charging puck. ESR says when charging
and watching video at the same time, the 6-1 can charge the iPhone 14 Pro in about 3 hours compared
to more than 7 hours with the Apple charging puck. And that is because of the built in Cryoboost.
When phones are charging, especially wirelessly,
they create heat and phones don't like that. That heat can cause the phones
to throttle down their charging speed, adding more time to charge your phone.
CryoBoost is ESR’s cooling tech that helps keep the heat down when charging
your iphone using a quiet fan and heat-dissipating components. These
help protect your iPhone’s battery and accelerate charging speeds!
All you need to do to activate CryoBoost is connect your iPhone to the charger
using MagSafe. The magnets are really good, too. Nice and strong so you wont
need to worry about your iPhone falling but still easy to remove.
oh,And Look at this, The ESR 6-1 will even work great for the new StandBy mode
for iPhone. All you need to do is connect your iPhone with MagSafe and rotate it 90º
which will give you a widget display for quick glance items, or like a night-stand
mode! Or the ESR stand would be great for watching video on your iPhone as well.
But back to CryoBoost, The cooling tech will start working right away with a blue
light indicating that Cryoboost is activated. The light and fan are both barely noticeable
here on my desk which is great because I don't want to be distracted by it.
If you are going to use this next to your bed while sleeping and are concerned about the light,
you can easily turn off the CryoBoost fan and light by pushing this button right here.
Now, I did some tests comparing the charging speed with my iPhone 14 Pro,
using both the ESR 6-1 MagSafe with CryoBoost and the standard Apple MagSafe charging puck.
I started off both tests with the 14 Pro at 10%
and charged them to 80% to see the CryoBoost in action.
At the beginning of both tests we can see that ESR’s charger takes a lead at
the first 10 minutes…..When we get to 20 minutes, we can see the that ESR is
at 36% charge and apple is at 33%. CryoBoost is starting to help out by keeping the iphone
and battery cooler, which gives it about a 9% lead. And we can see it working right here…..
The ESR lead over apple increases as we move to 50
minutes with about an 18% difference, with ESR at 71% charge and apple at just 60%
We can see that ESR with Cryoboost charges the iphone 14 pro to 80% in
just 62 minutes with the apple charger sitting at only 68%. And It takes the apple charger
83!!!! minutes to charge this iphone up to 80% which means that the ESR 6-1 with MagSafe
and CryoBoost was 34% faster than Apple’s charging puck. That’s really cool and shows
just how important ESR’s CryoBoost cooling is and how it can help charge your iPhone faster!
Ok, As a 6-1, This charger does not stop with the iPhone. You also have
built in chargers for your Apple Watch and even your airpods. The ESR 6-1 is
Apple certified made for Apple watch, and compatible with every version of
the Apple Watch, all the way back to the original with 5 watts of charging, and the
AirPods charging pad is compatible with all AirPods with wireless charging cases.
I like that ESR has a built in Apple Watch charger that is Apple certified, rather than needing to
insert your watch charging puck. This helps keep the clean design and makes it more convenient.
Now, you might be thinking why is this a 100w charger when it is using 15 watts for
the MagSafe, and 5 watts each for the Apple watch and airpods. Well,
that’s because you also get these usb-ports on the side to charge any other devices you need to.
With 100 watts of GAN power, the ESR 6-1 intelligently allocates power to where it
is needed, including up to 100watts to the USB-C ports. With 2 USB-C and 1 USB-A port,
you can charge everything we talked about already,
pLUS just about anything else so, let’s see what else we can connect!
First, let's start with charging my MacBook Air…….Let's plug in
the cable to both the MacBook and the charger…..
Now I can also charge up my iPad Air using the second USB-c port……
And finally, I can charge something like this game controller, at the
same time, using the USB-A port.
Wow, look at that. We are charging 6 devices right now. This 6-1 charging stand can do a
lot. You could easily have this on your desk for your regular macbook charging,
or on a bedside table to get all your devices juiced up overnight.
It’s pretty cool that you can charge all your apple gear with a single charger!
So, how do you get one of these Brand new ESR 6-1 MagSafe Chargers with GaN? It’s
easy! You can get an early bird discount on Kickstarter starting at just $143 dollars,
using the link in the description below.
You can also check out the full ESR MagSafe lineup. They have a wide range
of MagSafe-compatible accessories for all areas of your life, from
home to work to travel, such as ESR MagSafe wallet,
ESR MagSafe Car Charger, MagSafe power bank, and more!
So, let me know down below what you think of this new 6-1 charger from ESR. Is this the all
in one charging stand you have been waiting for? My thanks again, to ESR for sponsoring this video.
Hit the thumbs up button if you liked it, hit subscribe if you want, and Ill see you next time.