Stay tuned to create wipeouts for real arcs and circles in Autocad
Hey, as you might know it is not possible to create
wipeouts for arcs and circles in AutoCAD
We will get the following message if we try to do it
The reason here is because we are using an arc
inside this polyline
But, if we try our tool, it works perfectly
Be aware, this is an advanced AutoCAD tutorial
If you are totally new to this video topic
I suggest you to check
one of my partner's videos below on the video description and then come back
Hey AutoCAD, the world is not just made of stray lines
so give us something for circles -
Well, nevermind, I just created wipeout for circles
So, let's apply this awesome command to this sign
As you can see this is a real circle
Let's try the command
One click and we're done here
Now let's move it down
And just send it to the front
So let's explain, how do we achieve this awesome command
First I'll draw a circle to test it
As you can see this is a real circle
The first thing that we're going to use is the command boundary we'll pick a point inside our circle
As you can see boundary give you a polyline and then we'll use flatten
We'll use L for last
Which means the polyline
And
then as you can see, what is happening here is
Flatten
Makes the polyline in many pieces
Now we can try the wipeout
We'll use L for last
And then yes to erase the polyline
So our wipeout is right there
But it's behind
So we also need to use the command draw order
And again send it this time to the front
That would be all of the steps if we would do this manually
But if you know the lazy Arquitecto already
You know that all of these can be done in a single click, so let's do it
Let's go to cui enter and let's create a new command
Whoa, what was that The lazy Arquitecto?
Random command? Oh
It says subscribe!
Now use the following macro
really quick
Bo for boundary flatten yes
Wipeout p for polyline. Yes and draw order
For reading codes and exclusive updates follow and like our pages on the video description
Now if we test our new command with this block
Which has a circle on it?
Let's see what happens
Click-click and Done, awesome!
.
You saw the power of wipeouts four circles, now enjoy and share it
.
I upload videos every
Tuesday, so don't forget to like the video, subscribe and turn the notification bell on. I'm the lazy Arquitecto
see you in the next tutorial!
For reading code and exclusive updates. Don't forget, sh sh
Come on AutoCAD, give us something for silk cord for, plop