2013 ford f-150 160 thou oh excuse me 164 068 miles it's got the 5.0 liter in it and
it has the 6r80 transmission and we have a recall 19 s19 sudden transmission downshift
we're going to program the pcm i'm going to go here and ids start new session all other
it's a pretty truck
so here it's connected operation progress the blue bar one all the way across
is f-150 with the 5.0 it is a 2013 model here so i'm going to confirm that when that gets done
talking all the modules i'll go up here to the toolbox
uh 19 s19
it's a check available powertrain control module pcm software update reprogram the pcm
using ids release 113.06 a or higher
so so f150 2013 model gear in dearborn michigan build date may 7 2012 through october 27th 2013
or kansas city april 18th 2012 through november 18 2013. this truck was built
february 1st 2013.
but i don't know so that's what we're going to go through that's what i was told to do
go here module programming
module reprogramming pcm
pcm ignition switch is on
just thinking about it during module programming this module goes through vin verification process
this process compares the bin and the module with the vin and other modules on the vehicle
you may see the bin verification screen more than once depending upon your response to the question
is the bin correct
yes yes it is
it is attempting to copy data from the network
it takes a second to get all this information from the network doesn't it
this truck
has a recall 1901 transmission molded lead frame extended coverage
we're doing the 19 s19 6r80 sudden transmission downshift powertrain control module reprogram
current software version your service tool has not been updated
yes later calibration is available do you want to program the pcm with it
current level so we're going from 88 to 80b
yes
confirm ignition switches off
ignition switch on
oh
i hate it when it does it
now it's erasing the old one
and reprogramming downloading the data
i hear my buddy dave out there talking
that's going to be my labor up code reprogram the powertrain control module using ids
must be
that's 0.3 hours
it's taking a sweet time
and we'll be back as soon as that's done
everything's back online calibration has been loaded and checked
so now what i'm going to do go over here self-test
oh
see everything's coming back online i got a bunch of codes from the module programming
i'm gonna go in here and clear all the codes up
the wreath
come up
hey
what are you
ah service continuous memory
see clear all the codes
everything's gone
i think he was on field here we go cleared all the codes everything's gone
everything's working i think the radio was on am though
and that's how it's done