1. Take out the main machine and all the parts. 2. There's big and small white rubber rings,
black rubber rings, screws and fuse. 3. White rubber rings are spare sets for the
filter. Detach the filter from the machine, you'll see small white rubber ring, which
is replaceable. Twist open the filter, you'll see big white rubber ring, which is also can
be replaced. 4. Plug in the filter the right way and avoid
situations like not going all the way in or going the wrong direction.
5. The fuse is the spare fuse for the machine. Replace the fuse if it blows. Pry open the
fuse cover with the screw driver and replace it with the spare fuse.
6. Black rubber rings are spare sets for ultrasonic cavitation&RF handle, suction&RF handle. Twist
the probe open to replace the rubber ring. Be sure to tighten it after replacement.
Spare Accessories Replace any faulty accessories with the spare
sets 7. Take out the screws and starts to install.
Aim the handle holder at the right place and twist the screws into the machine.
8. Install the handles. 9. Insert EMS&EL Facial Anti-aging Handle
into the machine jack and tighten the screw. 10. Insert Suctio-n&RF Facial Slimming Handle
into the machine jack. 11. Insert Suction&RF Body Sculpture Handle
into the machine jack. 12. Insert Ultrasound Cavitation&RF Body Shape
Handle into the machine jack and tighten the screw.
13. Place the handles on the handle holder. 14. Connect with power supply.
15. Check if everything's properly installed. Click the power button to turn on the machine.
16. There's 4 handles shown on the screen. 17. Click RF&Suction.
18. RF energy level ranges from 0-10. Suction time ranges from 0-9.
Release time also ranges from 0-9. 0 is direct suction.
Working time ranges from 0-60. 19. Twist the knob counterclockwise to decrease
the suction intensity and clockwise to increase the suction intensity.
20. RF has two working modes - NOR and PRO. Under NOR mode, RF reaches the set energy
level and red LED turns on immediately. Under PRO mode, RF slowly releases energy
to the set level and red LED turns on only after the probe comes into contact with the
skin. 21. When release time is set between 1-3,
RF energy level is advised to set between 3-7, and suction time between 3-7. Longer
release time means bigger interval between suction and release. Working time for each
treatment site is advised to set between 10-15 minutes. NOR mode can be used for facial massage
and relaxation, and skin firming. It helps boost blood circulation and better absorption
of skin care products. When release time is set at 0, vacuum is at
direction suction mode. RF energy level is advised to set between 3-7, and suction time
between 3-9. Working time for each treatment site is advised to set between10-15 minutes.
PRO mode can be used for facial and neck scraping, detoxification, shaping, lifting and tightening.
Adjust suction intensity subjecting to one's own comfort level.
22. Go back to Home page. 23. Click EMS&EL
24. EMS energy level ranges from 0-10. EL energy level also ranges from 0-10.
Working time ranges from 0-60 minutes. When used together, it is advised to set EMS
energy level between 3-7, and EL energy level between 3-7, and 10-15 minutes of working
time for each treatment site. 25. Click start and the red LED turns on immediately.
Apply essence on the treatment site before use.
You'll experience a slight tingling sensation during the treatment.
26. EMS and EL can also be used alone. When using only EMS function, it is advised
to set the energy level between 3-7, working time between 10-15 minutes.
When using only EL function, it is advised to set the energy level between 3-7, working
time between 10-15 minutes. 27. Go back to Home page. Click RF & Suction
Body. 28. RF energy level ranges from 0-10.
Suction time ranges from 0-9. Release time ranges from 0-9.
When release time is set at 0, it's direction suction.
Working time ranges from 0-60 minutes. When release time is set between 1-5, RF energy
level is advised to set between 3-7, and suction time between 3-8. Longer release time means
bigger interval between suction and release. Working time for each treatment site is advised
to set between 10-15 minutes. 29. Apply gel or massage oil before use. Under
NOR mode, you'll experience suction and release on the skin. NOR mode can be used for body
massage and relaxation, detoxification and muscle relaxation. Make sure the probe surface
is in full contact with the skin to avoid burning the skin.
30. When release time is set at 0, vacuum is at direct suction mode. RF energy level
is advised to set between 3-8, and suction time between 3-7. Working time for each treatment
site is advised to set between 10-15 minutes. PRO mode can be used for facial and neck scraping,
detoxification, shaping, lifting and tightening. Adjust suction intensity subjecting to one's
own comfort level. 31. Go back to Home page.
32.Click RF & Ultra Sound. 33. Ultrasound energy level ranges from 0-10.
RF energy level ranges from 0-10. Working time ranges from 0-60 minutes.
34. M1 is consecutive mode, which is to say the handle starts and keeps working consecutively
after clicking start. M1 mode is suitable for those with thick layers of fat and want
o lose weight. M2 is intermittent mode, which is to say the
handle releases energy intermittently. M2 mode is suitable for those with localized
fat pockets and opt for body toning. 35. RF here also has two modes to choose from
- NOR mode and PRO mode. 36. When used together, it is advised to set
ultrasound energy between 2-8 and RF energy between 2-8 as well.
37. During RF & Ultra Sound treatment, the red LED is lit up the entire time and will
not be turned off as you change the RF mode. 38. Always apply gel before use and make sure
the probe surface is in full contact with the skin to avoid uneven energy distribution
or burning the skin. You'll hear slight ringing in the ears, which is expected. Adjust the
energy level subjecting to one's own comfort level.
39. When using ultra sound function only, it is advised to set the energy between 2-8
and select M1 or M2 mode. Working time for each treatment site should be around 15 minutes.
Ultrasound can be used for body slimming and fat dissolving. It can not be used on chest
or back. 40. When using RF function only, it is advised
to set the energy between 2-8 and select NOR or PRO mode. Working time for each treatment
site should be around 15 minutes. RF can be used for body skin tightening and removing
wrinkles.