[SFX]
well hello folks this Yamil Sued for Gun Stock Reviews and I'm here at C2
Tactical range in Scottsdale Arizona in where we shot this shotgun for the first
time that the VR 80 and some of our viewers asked us if we could change the
stock the thumbhole stock configuration to one standard AR-15 pistol grip and
stock like for example like the Luth AR Chubby and the MBA 4 stock and yes
absolutely you can and we're gonna show you how it's done we have already taken
the shotgun apart we took the upper away from the lower and it's just basically
two pins like an AR-15 it comes apart we decided not to do it on camera
to save time so here's the upper we took it apart and we're gonna put it aside
and we're gonna go ahead and swap and remove this thumbhole stock
configuration and go ahead and install the Luth AR parts first thing we're
gonna do is remove this cap here on the pistol grip use a Philips screwdriver of
course we using our Brownells magnetip set which is very versatile and we're gonna
remove this cap it's not that hard to take out and of course like I always
tell everyone keep your parts you never know if you're gonna put it back in the
original configuration for whatever reason then the butt pad gets removed
exactly the same way with a Phillips screwdriver I wish I would have brought
my electric drill to save some time but that's ok my first time I did it I use
an electric drill and it went a whole lot faster okay again we're gonna keep
this part like everything else and then right in there if you can see there
inside of the stock there is a allen head screw there it's actually you can
use a 3/16 allen head wrench I'm using these
long ones with the with the t-handle on them there are a whole lot easier to get
into spaces like these let's go ahead and take it off
and usually it's not too
tight so you'll be able to remove the Allen part really quickly
and the
plate and the screw comes out at the same time okay the same way inside of
the grip there's an Allen head screw the same kind of screw that was on the
buttstock so let's go ahead and remove
it same way go ahead and remove it I'm
using the t handles which are really they come real handy you can get any of
these as some of the big box hardware stores I get mine at Ace Hardware
the screw came out and we're gonna save it like always always save your products
and your part the cool thing about this is unlike an AR-15 there are no Springs
coming out of the grip area and this buffer tube that comes actually inside
of the shotgun is a commercial buffer tube so it's got to be really simple for
us to put a loose AR buffer tube in there as you can see this VR 80 shotgun
has a commercial buffer tube for carbine already installed when you remove the
pistol grip thumb hole configuration but if you really wanted a milspec tube like
this one you could actually replace it the same way you would replace the ar-15
one just basically remove the castle nut put the new buffer tube in and you're
set to go we are gonna leave the commercial one
for this for the time being but I just wanted to tell you you could do this so
next step of course is grab our Luth AR stock and of course to install
the Luth AR stock there's a little notch there that needs to match with
that notch there you do that and you can pull it all the way down and look at
that done next thing we're gonna put the pistol grip on and I wanted to verify
that this is the same thread pitch that comes with the this is the one that
comes from the factory this is the one that comes with the screw that comes
with luth AR and note they're not the same so this is an American thread
pitch and most likely this is metric so we're gonna have to use the one that
comes with it so I'm gonna verify that it's the same one yes it is let's go
ahead and install it using the same t-handle we're gonna go ahead and
install it
it's a little tight
but ready to go
don't over-tighten it because this is plastic and you don't
want to damage the plastic part that's tight enough and tight there you have it
the VR 80 from Armscor now has a Luth AR pistol grip and a luth AR
stock let's go to the range and shoot it a little bit
thank you for watching gun stock reviews
[Music]