Hey, guys.
Stephanie, with americanmuscle.com.
Here is a review and an install of the SR Performance Muffler Delete Axle-Back Exhaust
that's available for the 2015 and up, S550 GT Mustang.
We're gonna cover a few things with this exhaust in this video.
We maybe be talking about the sound of the axle-back, the materials, and the install.
The install for this is easy, it's a two out of three wrenches on the difficulty meter
but only because you do need a cut in order to install an axle-back on an S550, but we'll
talk more about that later.
The SR Performance Muffler Delete Axle-Back Exhaust is going to be a system that you should
check out if you're looking for a stainless steel axle-back to make a big change in your
exhaust note, but you want to keep the cost down as much as possible because, let's face
it, exhaust for the S550 can get expensive fast.
Muffler Delete Axle-Backs are more budget-friendly than normal muffler assemblies, so in this
case, you're getting a ton of sound at one of the most affordable prices.
Normally in an axle-back video, I'd start by talking about the mufflers right about
now.
In this case, we don't have any mufflers.
A muffler delete system like this one is going to be loud and aggressive sounding because
all that you have here are a set of pipes.
A set-up like this is also going to reduce the normal flow restriction that you'd get
with a traditional muffler set-up.
All that you're looking at here is stainless steel tubing that bolts up to the factory
piping, maintains a 2.5-inch diameter, and ends with 4-inch polished stainless steel
tips.
This is going to make for a very big change in exhaust note.
After the resonator, you're not going to have any exhaust filtration whatsoever.
As you heard in the sound clips, this is going to be much louder than stock and deeper sounding.
The good thing about this axle-back though, is that if you want it to be tame it can be,
but it gets rowdy when you lay into it.
It's nice, in my opinion, when you get a sound that changes like this one.
You have more of a range of tone and sounds to enjoy, and you don't have to worry when
you're idling or lightly cruising that your car's going to be too loud.
You do come across a little bit of drone with this axle-back.
It is a muffler delete system, so I'm personally not surprised by that fact.
It's definitely not the worst drone that I've ever heard but it is noticeable.
As far as sound inside the car, you can hear that you have an aftermarket axle-back on
the car but you don't get the same sound on the inside.
It's much more toned down.
This makes the drone not that bad, so it's not gonna be a deal-breaker, in my opinion.
That being said, and after you guys heard the sound clips, I'm going to label this one
as a four out of five on the loudness scale, one being a quiet upgrade and five being a
very loud upgrade.
For an axle-back, you can't get much louder than this.
I will say though that you should keep in mind that you get this volume and this sound
with the stock resonator still in place.
If you ever change you mid-pipe down your road, or even your headers, this system is
going to get even louder, and it has a potential to be very loud depending on what you do with
the rest of your exhaust system.
Just keep in mind the smaller diameter inlet that this axle-back has, being that it's made
from stock exhaust.
I mentioned earlier that this axle-back is stainless steel.
Stainless steel is the best option when it comes to exhaust.
If you're looking for corrosion resistance and a long life from the product, it's going
to have property advantages over other materials, like aluminized steel, and it's gonna hold
up much better over time.
Next, we're looking at price.
If you want to pick this axle-back up, you can expect to spend between $300 and $400.
As our Performance does also offer this system with black tips, if you prefer that instead,
but it is going to cost about $20 more.
This is the most affordable axle-back for the S550.
That does go back to what I said earlier about muffler delete systems being less expensive.
This axle-back still has the 304 stainless steel, though, so you aren't lacking in materials.
You're gonna be looking at the typical cut and clamp design with the install for this
axle-back since you need to cut all S550 axle-backs.
I'm gonna call this a two out of three wrenches in the scale but just because the cutting
that's involved.
It's nothing difficult, but I just recommend some eye protection and a fresh plate to make
the cutting easier.
Overall, you're looking at about two hours to get this all done.
A lift would certainly make things easier for you here, but the job can be done on jack
stands as well if you don't have access to one.
Cutting the factory axle-back isn't hard, just be sure to measure twice and plan a mark
where you'll be cutting so you don't make a mistake.
The new axle-back will come with new clamps for you, so you don't have to worry about
that.
When you go to install your new set-up, it will probably be easiest to leave everything
loose until you have it all lined up and then tighten it down.
Wrapping things up with the SR Performance Muffler Delete Axle-Back System, this is a
stainless steel axle-back that maintains a 2.5-inch diameter.
It's designed to be used with the factory exhaust, or an aftermarket exhaust with the
same diameter, and it delivers a ton of sound.
As always, you can check it out more online right here, at americanmuscle.com.