Hello, assalamualaikum warahmatullah barakatuh, see you again with the Black Builder ID channel
, the reference channel for do-it-yourself. In this video, I will do a little tutorial on
the application so that Colossae is produced from bioindustries, how to apply biocolor, here we
go through or do the first four stages, namely it should be white below. Now you can
say this is wood putty, after applying white enough, we continue to apply it with a
primer coat, so this pot primer is the base paint, this is more Adi, I used the
white one and there is also the black one and after the primer pop, that's enough I continue
with hi, the main porn is diablos, I use the green one, this is bright green,
the last one for the top layer, I use the tobot plus, it gives
a glossy impression or appearance so it looks more luxurious, yes. For friends who like
the browsing look using tobot from let industry I highly recommend it, it's bright, it's
easy, it's also environmentally friendly. Ah, this is the color like Dream.
I rolled it with shopboard gloss so it gives a shiny impression.
Hey, I'm shiny and I think the color is bright and cool, so
we can apply it to like a child's study table or a child's bed because the color really
gives a cheerful impression so it's very suitable for the child and apart from
this paint material, it's environmentally friendly and water based, it's VOC and it's okay for
a dangerous former prey like this indeed this is a very good innovation,
yes, for me from bio-industry friends in Jogja, sono, because yes, here is the procedure for applying
biocolor
here step-by-step from white to rockwool . We make sure
it's smooth and even, so if it's still rough, we can make it smooth n first After
that we can start with the first application, namely the wood substrate which we will give the color
with the costs of the colors we have to flatten it first or grind it first we can use the
Sanders machine and after that we clean the remnants of the sandpaper using a clean cloth
hi hi, for the application of white wood, can we mix it with water or not
in this experiment I did not mix it with water and I directly applied
it to the wood without using a thinner and I used a palette knife to spread white with
white over the entire surface of the wood and during the Hut process. We have to
make sure that all areas of the wood surface are covered by Hut Hai. After all the
wood surfaces are covered with putty, we wait for it to dry for about 20-30 minutes. After that we sand it
with great 240, it doesn't need to run out, but the important thing is that the surface of the wood is smoother
and more evenly in this experiment I just I use with white once and
after that, after the sanding process, I continue to apply the primer coat,
hi, hi, before applying the primer coat. We have to clean the remaining dust from the
previous sanding, and for this experiment, I used a white primer coat and
for the ratio of comparison with water, which is 2 to 1, yes here because I use
a phone brush so I use a ratio of 2 to Hi, stir the primer coat mixture with water until
homogeneous and after that we strengthen it with a Sponge brush all over the wood surface until evenly distributed
Hi After all the wood surface it is covered by the primer coat, we wait for it to dry for about
60 minutes and after that if we want to apply it to the second primer coat,
don't forget to sand the threshold with great 400 sandpaper and we clean the remaining dust and
we apply the primer coat again to the entire wood surface after the primer coat has been applied.
both of these we will continue to apply bioduco colors and before applying the Biado Colors
, we drench the primer coat with great 400 sandpaper until smooth and even
and for the application of the bioduco colors, here I use water thinner with
a ratio of two to one. After that I stir until homogeneous and for the application
, here I am I use a phone brush so that the results are more even in my opinion and we
fill the entire surface of the wood and after that we dry it for about 60 minutes.
The shape starts after the Biado Colors dry and if we want to apply the Bioduco Colors
more than once, we sand the threshold with grade sandpaper. 400 and after that
we apply it again for the Biado Colors to the entire surface of the wood and we wait for
it to dry again for the next 60 minutes Hi guys after the process of applying Biado Colors I think it's
enough here twice and apart from this I will continue to apply Bioduco Topcort so for
my one choose a gloss topcort to make it it gives a glossy appearance, but before we apply
the bioduco topcort, we have to first sieve the threshold of the Biado heat layer with great 400 and for
comparison the ratio of bioduco topcort to water because I use water thinner it is
2 to 1 and for the application here I still use a friend's phone brush -friends
can also use bed linen, but because this is just an experiment, so I only used
a sponge kwak which in my opinion, the results are pretty
good
. we wait for it to dry for about an hour and if
friends want to continue for the second application we have to do threshold sanding with
g400 and after that we apply the second topcort again and for the application of bioko colors in
this tutorial I only applied topcort twice and the results can be let's see er Kyle Kyle
his form that was the result of our experiment in our tutorial and this is the result
that I showed earlier like this the color is light Green it's bright can
give it a make it Boss so he gives it a glossy glossy appearance
Hi and if I apply it two or three more times or more than twice it might
disappear even more Oh yes, in my opinion, even twice it was more than enough
, this store application I am good for the rest I apologize if there are shortcomings and I hope
this video is useful don't forget to subscribe like and share and turn on your bell
so you don't miss the next video from us, see you on hi hi