Hey guys, so this is gonna be part two of my iND reflector install, the painted ones
that I got a couple months back.
And I got these before I got the car so I've had these for quite a while but I've been
putting it off because it is a daunting task from what I've seen and I had trouble with
the front.
It took me about an hour - over an hour to get that done.
But hopefully the rear ones are okay.
This one, I think there's only one tab in this one.
And, let me quickly set that up.
So this is what the rear looks like.
And there's one tab to depress here right in the middle.
Right here.
And the rest are just kind of hooks.
Looks like, so it's very likely you can just pry it off just by like - you know, from the outside.
But I'm gonna try to do it right and hopefully just depress the tab here and and push it out.
Hopefully it should be really easy.
But we'll see how it goes.
Okay, I'm gonna see if I can get a camera under here.
I don't know if I'm showing anything right now, probably not.
Put my hood up.
Ow, my neck hurts.
Okay, so I jammed a screwdriver kinda between the tab and the bumper.
So hopefully at this point, all I have to do is pry it from the front.
But we'll give it a try.
So yeah, get your plastic trim tools.
So I got these from Home Depot.
These things here.
And so, I'm just gonna be trying to pry it from underneath.
So how do I want to pull it out?
I think I wanna pull it out from this side first right?
Because the way it looks, this thing hooks in.
It's gonna get pulled out like this.
I think I need something more solid than this.
And actual like metal tool probably.
Okay, so the easiest way will just be to press this tab and then push from the right side.
There!
There you go.
Oh this is so much cleaner than the car.
[Snapping]
That's it!
So that's one side done.
Now we'll do the other side.
So this is the other reflector now and it's just kinda opposite side.
Look how like it's been painted.
It's funny, clearly just a red one that they've painted mineral white.
Anyway, guess there's not much more to say.
I'm gonna get started.
This one might be a lot easier because the electronic module for the valve is not here
on this side.
The hardest part is finding it.
Oh found it.
[Snapping]
Here's that one done.
Now again, side by side comparison.
And just pop the new one in.
[Snapping]
This one is more satisfying.
It actually clicks.
Okay, that's it, all done!
That is the rear painted reflectors from iND.
And if the car was cleaner, I'd be able to determine whether the paint matches.
But I'm gonna say it does.
You know what, I'm gonna wash the car first and I'm gonna probably take some after shots.
Okay, so here's the rear and I just finished washing the car and you can kinda see better
how it matches the body paint.
And here's the fronts.
I never got to show it last video, so here it is.
Okay so that's gonna be it for this install.
And it was really so much easier than it was doing the fronts.
The fronts just killed my fingers but this one was actually really easy because all you'd
have to do is pop it in - or pop it out from the back, as opposed to prying it from the front.
So don't do it that way, definitely come in from the back.
[Laughs]
But yeah, that should be it for now guys, thanks for watching!