Today we're showing you how to properly assemble the SC500-AF Mobility Carrier from Rage Powersports.
Parts needed for assembly include Carrier, Carrier Tube Support, Support Brackets, Folding
Hitch Tube, Spring Pull Pins, Eye Bolt Brackets, Eye Bolts & Nuts, Ramp Lock Plate, Ramp Handle
& Nuts, Support Bracket Bolts & Nuts, Carrier Support Blots & Nuts, Washers, Ramp Lock Bolts
& Nuts, Ramp Lock Brackets, Pull Pins & Clips
Parts needed for step 1 include Carrier Tube Support, Support Brackets, and Support Bracket
Bolts & Nuts
To begin Secure the Support Brackets to the Carrier Tube Support using Support Bracket
Bolts & Nuts.
At this point keep bolts finger tight.
Repeat this process for the next Support Bracket.
Parts needed for step 2 include Folding Hitch Tube, Pull Pins & Pull Pin Clips
Slide the Folding Hitch Tube into the Carrier Tube Support end and install Pull Pin.
Secure the Folding Hitch Tube to the Carrier Tube Support with bolts and jam nuts.
Next slide the remaining Pull Pin into the Folding Hitch Tube to prevent the carrier
from folding.
Parts needed for step 3 include Carrier, Carrier Support Bolts, Washers & Nuts
Place the Carrier between the Support Brackets and align mounting holes.
Secure using Carrier Support Bolts, Washers & Nuts.
Now, fully tighten all bolts, including the bolts from step 1.
Parts needed for step 4 include Ramp Lock Plate, Spring Pull Pins, Ramp Lock Brackets,
Ramp Lock Bolts & Nuts
Secure the Ramp Lock Plate to the Carrier using Ramp Lock Brackets, Ramp Lock Bolts
& Nuts.
Screw the Spring Pull Pins into place and secure them to the Ramp Lock Plate using Jam
Nuts.
Spring Pull Pins may need to be adjusted to properly store the loading ramp.
Repeat this process for the next Spring Pull Pin.
Parts needed for step 5 include Eye Bolt Brackets, Eye Bolts & Nuts
Attach Eye Bolts to each corner of the Carrier using Eye Bolt Brackets & Nuts.
To tighten the Eye Bolts, slide a large screw driver through the eye hole and tighten.
Once tight, remove wrench and turn the Eye Bolt to face the carrier.
Parts needed for step 6 include Ramp Handle & Nuts
Slide the Ramp Handle into the handle mounting holes and secure in place using Nuts.
Once secure fold the loading ramp down into the storage position.
Red reflective stickers are included for added safety during transport.
Thank you for watching this demonstration video on how to properly assemble the SC500-AF
Mobility Carrier from Rage Powersports.