Hello, assalamualaikum warahmatullah barakatuh, see you again with the Black Builder channel
the reference channel for do-it-yourself Okay friends, in this video I want to unbox and review the tool, the
name is Pocket hollchi.
from this, then this is the main character, you need all of them, yes, this is
the main character, yes, so this is a pocket hold ictuin one where we can make a hole for the
shovel so that it is not visible when we connect wood, then we can also
make a double hole so that it is upright actually straight for double use on
this jack actually in my opinion it is more effective to use this one first Injit but later
we will still try okay okay then we also get this we can say about 15
cm long H2O yes s2ph two yes superplus then we get this drill bit so this drill bit has
a unique motor size, if you want me the motorbike will come back dian has a stopper, the instoper
is small and the motor can be seen at the very end, it shrinks like this
Hi then we also get free screws and covers for used sports holes So
I'll show you later How to use it okay okay How to use it we
will try to install screws, make wood connections, then install or
drill for daul holes, well, we will try, yes, the parts of this tool are
locked, we can get this face, we can move it forward and backward, we close it and this is its function
to install the handle like Some of these are put here so we usually use the handle
If we want to make a raw hole, so if we want to make a scrub, the handle is
removed
. so when we want to do
this, we put it in here, like this, there is a translucent and later on for the drill bit
, we will compete with the stopper which is to limit the drill distance later, then in this section here
, here is the size. Hi then this is the tutorial and this can be reversed, we open
the smell and we turn it back later. Now for the double hole, here it is because it's a key monster.
Now, here's how to replace the hole. Please find it first, loosen it, then
we lift it up a bit and we turn it into the hole of the person we want. If
it doesn't lift, it can be like this, but we can't find it. We lift it up a bit, maybe we open it
and to the number of holes is from 12, then there are 10, then there are 8 and he has
been 9, so there are four holes in total, yes, here we lock it, Hi, I and this is the bottom
, yes. So before we use it, it is installed on the drill, we can using a cordless
or electric or a special screw drill and this for the borini I use the
18volt Black Decker Let's make it stronger, right, and for this screw, I put it on the
10volt Black Decker. We tighten it. OK. Then for the position of the drill bit, it's time for us to
drill like this, for example, the word for the end of this small one Hi, it's quite a
distance because of this As for the size, it fits my drill bit with the
stopper at zero, right? So it's not that wide, so I don't use stoppers like that
and if I use a stopper, we open it first, right or so far? I
just used a stopper
and for the installation of the stopper, it's very cultural in this area. Here, we enter
Hi, around and we determined the distance, yes. And we adjust it to the wood of the workpiece that
we are going to work on. We're embroidering this hole,
so there's a plastic covering that covers it, let's try this here, too, and we'll measure it,
for example, with an distance like this, yes, let's overlay it here. Now, we can
tighten it to the
right .
I want to experiment with making a connection, Ms. join, for using
this tool, make sure the stopper is right at the end of the wood, then it would be better
if we use clamps so that the position of the pocket holchick is stable when drilling
does not move anywhere, then we drill both holes alternately using the
default drill bit available in this holchick vocal purchase package and we use fullspeed yes
for the speed of the drill and after being drilled it looks like this it will leave
a slanted hole and the ends form two holes then we put them together with
the other wood and we do screwing and real it would be better
for it so that the results are maximum we can use glue first then we do a lot
of sacrifices or if possible for a stable position we can also give cream between the two marriages,
whether it's we corner or kmf and the result is like this we have screwed Then For
this hole, we can cover it with wood glue putty or filler, but here we use the default plastic
hole cover and the result is like this and it is very strong, which is very strong, especially
if given glue, then here I give an example, I want to connect two boards, now
where to the position of the hole is free and this tool is caught by hand, you can make 2/3 holes
or as needed for the stop lamp, we go up, right? And we drill 11 according to
the location of the hole we want to drill and the method is the same.
install the scrub or we can stabilize these two woods we can use clamps and here we
drill slowly and the other one is the same make sure for the water it seems it is flat
when we screw and for the holes from the things we drilled we can
also close using putty glue or filler depending on the need How
and here I still use the default Hi cover from this tool, what is meant by this method
, it is strong and flat, especially if we give glue OK Then for installation,
not well, here I am, manually, we give it first or we mark the drill point
that we want to give the dawl and let's make the center line, yes and this center line later as
a benchmark for us to equate with the zero line on this pocket holchick like this is the center line
and there is a zero as the center so later when we drill
the hole the center flashlight and don't forget to use yes and to change the size of the
hole also lift it first for the round part of the hole, that is and we select the hole
we want after that we make sure the point fits right in the middle of the hole we want to
board and then we do the drilling like this we make sure in the middle for the team from
the drilling hole and we boruto all the wood that we want we want to make a connection
with this double for us only and in this way and the way we equalize the main position
Sagita buys the marking at the beginning the results will be accurate and we attach the leaves and
we can add glue too yes And if at the beginning we can cut that length
too and after that we unite the two woods that we want to connect with a double connection and
beat it slowly and don't forget to use glue and the result is very
strong yes to connect or laminate kawiyah using daul yes yes yes this is the result
for the connected board then this is the joint connection of two beams Hi the results
are very strong highly recommended Pocket holder in What is this so in one the first season
is to make screw holes for wood connections and music is to make holes for dawal which
is also intended to make wood connections yes My age is the tool is really important huh I mean I
really want it to be easy for us to work, especially in making wood connections so that it is neater
and stronger, but specifically for making initial holes. In my opinion, this tool for making
daul holes is still not very effective, because I personally recommend
downlinking Cikini is for making a connection using a double because I think
this position will be more accurate and about this, friends, you can see the link
above here, for a video review in Indonesia OK OK, thank you for watching
my video If there are mistakes, I'm sorry and for friends who have not subscribed
to my channel, please subscribe so that even more enthusiastic to create
useful information content for all of your friends and also like and share for your friends who
don't know about the BlackBerry ID channel, see you in the next Yi video clip, hello hi