We're doing a little tool review today. in the video you're going to see the new
MANPA Tool MULTI-Cutter. It fits on an angle grinder and we'll set it up and
try it out I'll show you how we curve just a leaf
project that we got here we got a whole bunch of tools to
try over the next little while so we doing a bunch of videos on and as always
thanks for watching thanks for subscribing thanks for following along
stick around we've got lots more cool stuff
this here is a grinder holder extension basically not going to show you the
boxes not much in the box they said it's just this handle that attaches four
screws. It basically clamps on the angle grinder
so you can hold it. Its got a handle
so when you're carving with it or using it then it's a
lot more stable it's like a rear hand and saw that's pretty cool
The really cool thing about this is this grinder here is broken the mount on it that holds it
together that holds the body together is is broke inside so this handle here
holds it together because the the grinder works perfectly good it runs
great except that the there's a stupid little plastic shaft that you screw to
the bottom of this that holds it together and magically this handle holds
the body together so I don't have to worry about it
so it's a great great tool to use for the MANPA attachments that's pretty
simple thing we're gonna try out today is this mini cutter there's a few
different ones on the market they all run on chainsaws these ones run on the
ground which is I think a little more gives you
a little more control and you're not always working with the gas so it's nice
to have some electric stuff to work with hey we're gonna open it up this is the
three it takes either three or four inch attachments we've got them all so we'll
be trying those out at some point nice packaging
I got catalog come with it instructions step-by-step instructions but it's
pretty straightforward I don't think we'll start putting
together and if I need the instructions I'll read them but they're all
step-by-step pictures
more instructions comes with the grinder key it's got a couple of bushings they're
marked with the different grinder attachment so if you have a bosch or a
Makita then you need to use this ring to fit around the head of the grinder so
you can see the grinder head this thing here is going to slip over top of
that to fit onto the head attachment so here's the head attachment that's your
cutter basically you want to take this take this ring for whatever grinder you
have and slide it in there it fits inside then
the next thing you want to do yes
take the it's the belt drive a doctor that fits on to the grinder basically
you want to take that and just like you would any attachment for the for the
grater you screw that on there and this housing just basically will slide right
on top of that it's a good nice snug fit it's kind of an adjustment
screw for tightening it down but you can adjust y
that around for however you want to use it
and this handle can be adjusted as well so they have a bunch of different holes
for moving it around for for however you prefer whatever the best position is for
when you're using it so interesting anxious to try it out see how it works
It Come with a drive belt, couple of drive belts oh that's nice yeah nothing worse
than getting a getting a new tool and it comes with one belt and the first thing
you do is overload it or something and then you end up breaking it and
then it's like what do I do now where am i gonna get a new
belt for this .
basically we're just gonna take that belt and feed it over top make sure you
got the drive drive side of the belt down I'll feed that in there yeah
probably gotta go the other way if I read the instructions you'd probably
find that
so they got an adjustment just been here for your tension on the belt
spring-loaded
and you want to make sure it's square it up
looks pretty good this top head is spring-loaded so when you loosen it off
you just push down and it pops back out so it looks like it auto tensions on
there taking that back up
Tighten this up
so you have to make an attachment or something you put the allen key on the
side of this because I'll be I'll be looking for the allen key that fits that
when I adjust it and won't be able to find it of course no oh yeah it's looks
Looks Pretty good
they have a couple of couple of other tools here that's for change you know
your cutter heads so get it by spare cutter head separately but they're all
replaceable they give you your standard grinder key so you can swap out the cutter
head take it off work on it
yeah next stage is to give it a try and see how it goes
hey so yeah we got the MANPA Tool three-inch cutter head all set up ready
to turn out I'm gonna power the sucker
- can do this is the project that Jacob and i are working on
it's a relief carving. It's a project for the university child care I think
we've got so many but it's a bunch of Leafs from different trees and plants
that represent each of the classes anyway I'm going to give this thing a
little try and see how it works just to check out the cutting see how the head
worked
sweet definitely does a nice job cutting bring camera a little closer nice smooth
cuts
yeah this one's got the round cutter heads there's a triangle cutter head and
a square cutter head so you can get different texturing out of them but I
like it it's pretty good it's nice and stable
Wow yeah what a fantastic tool this thing is gonna be wicked it's gonna save
a whole pile of time doing these some of these projects can't wait to try out the
other the other adapters the four-inch and then the the square and there's a
triangle cut doing furring stuff like that that's going to be wicked so stay
tuned we'll get to try out some of those as well
thanks for following along hope you liked it it's a little informative if
you got any questions about the tool then just to roam in the comments below
and let us know we answer all our all our comments and feeds and we sure
appreciate people following along we work hard to make some of these videos
to post their stuff on top of doing all the projects we spend the time to make
the videos so we'd really appreciate you following along and comments show the
love