Friends, a
huge hello to everyone Today, we’ll work with such side cutters with wire cutters. I
found them at the metal reception, someone threw them away. Well, I look at the
quality. it will be interesting to watch the video to the end
And I will start, let's go first of all with the help of the angle grinder, get rid of all the excess
, we got it now like this, but in order for our tool to look decent
and work later, it is necessary to remove all the rust with the help of a grinder, it will not be very convenient to do this
for this I will use this one Remove rust Kpps auto designed and made in Russia
so Friends let's support the domestic manufacturer the paste has a gel-like form and
is easy to wear with a brush the paste is a universal tool for removing corrosion from all types of
metals ideal for cleaning weapons from bugs before the bluing stage can remove not
only light plaque and thick layers of solid chamber, but also corrosion from ulcerative foci
, the paste from the surface does not drain KPPS promotes the formation of a protective film that stops
the oxidation process .
I leave it for 30 minutes and then remove plaque with a spatula and moisture
. repetition, the result is completely different.
Rust ate, but you look
here. Rust was just like that. It had to be cleaned to the end in a good way. Nevertheless,
there will be a protective film, the metal will not rust further
. everything is clean, not a single trace of corrosion
, but the tap decided to treat it with a cold bluing composition also of the
Kpps brand, everything is very simple here, the part must be degreased and a
layer of composition should be applied evenly, left for 2-3 minutes and then rinsed with water
, wiped dry and treated with oil and at the output we get a decorative black color
friends all I’ll leave links to the products in the description, the product is cool, let’s go
look, get acquainted, get friends, agree quickly, without dust, without dirt,
removed everything clearly, it will
be necessary to drill two holes
. 4 mm
East drilled a hole found such two pins of a metal
spindle, you can use fragments of drills or taps
at the exit, we get two of these, we will insert our drilled holes ordinary solder without
rosin acid for ferrous and non-ferrous metals inside put the solder now heat up and insert
friends Like this in in general, it already looks good soldered, it remains to make the limiter
, the limiter was made from the old tire. I’m from it. Girl, you can see the homemade channel on the channel now
, here we have a ready-made limiter. We need to cut it off
.
we will also do it with the help of a quick wound from CPPS, we will now use it
, I take acetone, I will use it as a degreaser,
we wipe everything thoroughly
and leave it for 2-3 minutes
. oil is pumped into the can
and we wipe it dry. Such beauty in black color has already prepared the screws and washers in advance,
this is a necessity to assemble a large
screw. the color is chic
, the processing of the purchased friends, we got such a
scribbler
, the same one, you can only
use it for metal, for wood, for plastic, I hope you found it useful
what I'm waiting for feedback from you write
your comments I wish you all good good health Until we meet again