- What's up everybody, Joey here at
Chemical Guys detail garage.
Today we got this Toyota four runner in the shop.
It's not that bad
but you do have like a light little grime.
You got some you know bee pollen, you got some cacita
on the hood as well.
Today we're gonna be utilizing a different form
of wash, somethin that isn't
so loud with like a pressure washer.
Somethin that isn't so tedious
as to pulling out all these garden hose
and washing the car with.
So today we're gonna be showing you guys how
to wash the car using Rinse Free
which is a waterless car wash solution.
(tempo music)
So like I said we're gonna be using our Rinse Free waterless
wash method here today.
Along with that we're also going
to be utilizing two dirt traps
for our two buckets
so we can do a two bucket wash method
so we can you know filter the dirt
and the grime that we're going
to get off of this vehicle from our wash mitt
so that we don't you know reinstall
that dirt on to the paint
and you know install more scratches and swirls.
So first you're gonna wanna
go ahead and put one
of your dirt traps in.
You're gonna wanna do
it in a angled manner
and then you're gonna wanna let it sit,
buried towards the bottom
and that creates a air tight seal
so that all that dirt stays forced
at the bottom of the bucket.
All right guys so now
that we have our dirt traps sitting at the bottom
of our buckets we're gonna go ahead
and apply our Rinse Free solution into one of our buckets.
We're only going to need
to use one ounce per five gallon bucket.
One ounce is pretty much equivalent
to about a good squirt, probably helped if I opened it.
(beep)
So one ounce is pretty much equivalent
to one squirt of the Rinse Free bottle, boom
that's all we're gonna need
and what we're gonna do is we're gonna
get our micro fiber wash mitt
and we're just gonna go ahead
and just mix it in the water.
So now that it's all mixed up we're just gonna go ahead
and ring it out
because like I said we
gonna wanna go ahead
and utilize as least amount
of water as possible
so that it doesn't get all over the place
and that's pretty much the point
of you know the Rinse Free wash.
So we're just gonna be pretty much using it in the same form
that we do our regular car washes
which is pretty much in straight motions.
Usually we start from top
to bottom but I don't have Walker
with me today so I can't entirely reach
that spot so I'll do that off camera.
So like I said we're gonna go
and set the wash mitt down on the hood
and we're gonna pretty much go ahead and roll it downwards.
I'll go ahead and wrist roll my wrist
while I'm doing that
so that all the dirt doesn't accumulate on one border.
And just like that you see how filthy the car is.
From that there I'm gonna go ahead
and go back to my rinse bucket
and what I'm gonna do is I'm gonna set it
towards the bottom, kind
of scrub it towards the bottom
so that the dirt gets ringed loose from the wash mitt
and I don't get
that back into the paint.
So like I said since this is pretty much you know
we're not gonna be using any water.
We don't have to rely on the water
to rinse that off for us.
That's why we're gonna have
to use a little bit more
of a cleaner process a little bit more lubrication
to not scratch the paint.
So as you guys saw
it's very easy to use, I'm gonna go ahead
and pretty much proceed
with the rest of the vehicle
and then we'll be back
so we can show you how
to clean the wheels
with the Rinse Free wash.
(tempo music)
All right guys, so before we get
to the wheels one quick thing I forgot
to mention is once we're done using the
Rinse Free solution you're simply gonna dry your car
as normal just as you would a regular wash.
So we're gonna go ahead
and grab our micro fiber towel
and we're just gonna go ahead
and just go over the car
and just dry the whole thing.
All right guys, so now that we're done washing the body
of the car we're gonna go ahead
and proceed to the wheels.
And the reason we're gonna do the wheels afterward is
because we don't want
to use the same washment
that we used to wash the paint
with the wheel because you know it's still wheels,
they still have iron contaminants on there.
Same you know same concept we're washing the vehicle, you
can use the brush
but you want to make sure
that you use different tools
for the paint versus the wheels.
So we're gonna be using a green
work force micro fiber towel.
Usually we recommend using black towels on the wheels just
because you know it's dark
and over time we don't want the grime
to start showing on the towels
but you know for you know purposes
of the video we want
to show you the grime
and how much you know the Rinse Free
can do will removing this level
of grime on the wheels.
So we're gonna start off by dunking our
towel in the Rinse Free solution
and same thing we're gonna go ahead
and ring it out
and use the light amount.
It's pretty damp and we're gonna top we're gonna
start from the top
and work our way to the bottom.
And we're gonna just work in straight motions just like
as you would the paint.
You'll see right now when I pull off the
towel it gets pretty grimy
so we wanna make sure
that we utilize the towel
to the best of it's capability
by flipping it to a new side you know
we don't have necessarily have
to dunk it in the washment just kind
of how we did the washment just because it's a towel we have
multiple sides so we can just flip it
to a new side anytime we want
to do the next part of the wheel.
Just gonna dunk it a little bit more
and we're gonna go work our way around.
And I'm just gonna go ahead
and kind of wrap around each spoke
and the crevices as well.
Make sure that we get all the grime cause these wheels
do have like little cracks right here
that we kind of have to dig into.
We'll proceed by doing about half of the wheel.
I'll flip it over to a new side.
Get the valve stem get in there.
And then we'll go back
to our rinse bucket.
Same thing, kind of scrub it at the bottom
to knock down that dirt.
Take it out, rinse it out, back
to our waterless wash solution, ring it out.
And back into the wheels.
So now that we're done
with the wheel, same thing we're
gonna grab a dry micro fiber towel
and we're simple just
gonna dry the wheel right out.
All right guys so now
that we're done drying the
vehicle you can see how easy it is
to wash your entire
vehicle using the Rinse Free waterless wash solution.
If you wanna make sure, pick up these products, visit our
web site chemicalguys.com.
Make sure to like this video, subscribe
and also comment down below.
If you like this product
or if you used it before
and also let us know
what video you wanna see next here on our channel.
This has been Chemical Guys detail garage,
Joey, see you guys next time.
(tempo music)