[Sound of kettle boiling and water pouring]
Hello! I'm Steve also known as TeabreakKnitter on social media.
In this t-torial I'm going to show you how I do decreases when
I'm [knitting] stranded colorwork, and I'm going to show you
how I decrease around this steek in the middle here.
So I've got an 8 stitch steek, with 2 edge stitches on it.
I'm going to decrease here, in these two stitches,
and in these two stitches in just the same way
as I would for an armhole.
I'm working in a chequerboard pattern that makes it
very easy to see see how the stitches are lying.
I'll just work up towards the decrease. One more stitch.
And we have a light and a dark stitch that we going to do the decrease on.
Now, if I was working in a single plain colour,
I would do a knit two together (k2tog) here,
so that the [decrease] stitch was lying parallel to the seam.
So I've got a right leaning stitch so that it will look
neatly lined up against the seam,
which will actually be made into the edge stitch.
But look what happens now in the colour work if I do that.
(I'll just pull this back stitch tight a bit
so that you can see what is happening here).
So you can here that you've got your colour work.
You've got white, brown, white, brown, white
and when the next stitches tighten,
those stitches lie over each other each other,
so we get two white stitches next to each other -
which is not what we want.
If we undo that, and instead of doing
a right-leaning knit two together,
I do a left-leaning ssk [slip, slip, knit]
(I'm succeeding in making the stitches quite loose by re-working them!)
you can see what's happened here now.
We've got white, brown, white, brown, white, brown, white
and the dominant stitch here is the brown.
Let's work our way over to the other side [of the steek].
On the other side the seam will be leaning the other way,
so it's where I would normally do an ssk [slip, slip, knit].
I've got a left-leaning stitch so that it
follows the line of the seam.
Let's see what happens if we do an ssk on the left-hand side of this.
Slip, slip, and it's going to end up with a dark stitch.
And [now knit] the light stitch next to it.
Once again, when things are tightened up, what do we find?
We have two dark stitches next to each other.
Let's see what happens if we do knit 2 together [k2tog],
a right leaning stitch.
Knit 2 together brings that left hand light stitch on top.
And again, I'll knit through it
so it is easier to see what's happening here.
Using the right-leaning knit two together [k2tog]
we have kept the light, dark, light, dark, light pattern.
And you can see that there's a dark stitch tucked underneath.
If you look on the other side, again
the light stitch is tucked underneath the dark stitch,
so you've kept the continuity of pattern going better.
So, in colour work, when you come to an area of decrease
at the edge of the fabric,
you want to use a decrease that leans TOWARDS the edge.
So if you're coming up the fabric and
to the left you've got an edge of the fabric at which you
will be decreasing,
you decrease using the ssk [slip, slip, knit] left-leaning stitch
to do a decrease there.
On the other side, where you are at the edge of the fabric
and moving in towards the centre of the fabric as you knit,
You want a right-leaning decrease,
the [k2tog] knit 2 together.
That way you lay the correct colour on top on the public side of your work.
This keeps [colour] continuity of the row before
the one you are knitting at the moment.
So that's the rule:
to do a decrease in colour work
lean the decrease TOWARDS the edge of the fabric.
I hope you found this useful.
Until the next time,
Happy Knitting!