WE ARE STILL WORKING ON GETTING THE IFLIGHT CINEBEE FLYING
in betaflight we see we get a response from the stick input but its screwed up but when we move the frsky taranis x9 lite switches don't work
hi guys thank you for watching a new episode of DIY Rc in today's episode we are going to learn how to set the aux switches
so we can get them activated and working in betaflight so you can set horizon made angle mode and arm and disarm the drone
and that is the next step to get the iflight cinebee 75hd in the air
and in the first step you have seen how we flashed the radio to openTx and D16
then we needed to bind to the XM receiver and in the last video we have set the failsafe in the radio and betaflight
ther is was i notice that we get no response from my sticks oh my bad i did got a response but it's not correct
and then we checked the switches and hade no response at all that is what we are going to need to fix today
and if you keep watching you will learn something and if you did then please give this video a like
because i can really use the support thank you very much
let get to it and the first step is going into the radio model and go to page 5 inputs from your throttle aileron elevator and rudder
and there we have to activate the switches in my other radio's the switches are on the radio and they just work
hire we have to set them up in inputs so you click 5 and then scroll to source then flick a switch that you want to put under 5
of course, you can also give it a name as aux 1 aux 2 aux 3 aux 4