[Music]
hey everybody drew with geoarm and i'm
here to talk to you about the
m2m mno2-lte whether it be the att
or verizon model it does not matter they
both wire in the exact same
we are going to talk about a few things
here today uh on this video
primarily we are going to talk about
getting your communicator wired into the
panel
for both non-interactive and interactive
services
so prior to getting any of this done you
want to ensure that your security system
is actually powered down
you want to make sure that you've
disconnected power to both the power
supply
and the battery so this panel is
definitely powered down it has no power
at all actually
so what we're going to be doing first is
uh we're going to be going over the
documentation itself
so this documentation is very important
for those of you that will be using the
interactive app specifically
because your login credentials will be
located directly on this
located right here it'll say user and
pass so make sure that you save this
documentation for those of you that are
using
the interactive app and even those of
you that aren't just make sure you save
this because it's got some useful
information on it i'm going to go ahead
and put this to the side
we're going to get it started on getting
this wired in the first things you're
going to see here are the antenna itself
and the m2m modules
so the antenna sometimes comes
disassembled with this piece off of the
actual antenna itself
so you just want to go ahead and make
sure to get that screwed on very very
easy
all right and then after you do that you
you know those of you guys are probably
going to be putting this outside of the
box or wherever you're going to put it
so
you're going to be probably going
through these holes or feeding it out
in this case what i'm going to be doing
is i'm just going to do it straight on
you know on top of here so you guys can
see this this antenna by the way is
pretty neat so
it's magnetic so it'll stick right to
the box so in this case we'll just get
this thing screwed on real quick
make sure it's nice and snug on there
okay
see that just connects very easy now
we're going to go ahead and get the
connections to the panel made
these first connections i'm going to
make here are for those of you that are
not going to be using the rcontrol app
to control it from your smartphone
uh this is for strictly just for
communications only just trying to get a
signal to central station
and that's all you're worried about so
here we go the first two wires you're
going to do here for those of you
doing this for communications only
you're going to be taking the red wire
and going to aux plus like so
then you're going to be taking the black
wire and going to aux negative which is
located directly to the right of the
terminal
of the one you just went into so ox
minus
for black
so we have our connections made for both
aux plus and
aux minus which is red and black
respectively
all right now the next thing we're going
to be doing here is we're going to go
ahead and get the
green and yellow wires wired in green
is going to be for the ring so you're
going to take
green and go into what's labeled a ring
right here and then go ahead and get
that screwed down
like so okay we've got our green
connection made now you're going to be
taking the yellow wire
and you're going to be going into tip
which is located directly to the right
of the terminal that you just wired into
so b tip screw that down
now there may have been wires in these
terminals prior to you getting this
installed you want to make sure that
there are no wires in
a b c or d these should be the only two
wires making connection down there
so now you have your connections for
both power for
for this device and now you have
communications so this device is
completely configured at this point for
communications only
so those of you that are not using the
interactive app you're good to go and
you're ready to rock
and now continuing for those of you that
are wanting to get this
wired in for interactive through the key
bus
it's actually pretty easy to do here
what you're going to be doing is you are
going to be taking this orange wire that
is hanging because there's only two left
orange and white the orange wire you are
going to be taking that
and it is going to be going into what's
labeled y e l
on your keypad bus and you go ahead and
you screw that down
okay and then you want to take the white
wire and the white
is going to be getting screwed into grn
or green abbreviation for green here
and get that screwed down and then at
that point this panel is ready
for the power to be reapplied and for
you to give us a call to get this thing
activated
don't forget to document the actual
serial number on this m2m which is
located right here on the front it's a
six digit number
that's what we're going to need to get
this going for you make sure to
subscribe to our youtube page
and click the show more tab underneath
the video
where you can view valuable links
pertaining to this product
similar how-to videos and our low-cost
no contract alarm monitoring services