Hi assalamualaikum warahmatullah barakatuh, see you again with the Black Builder ID channel on
the reference channel for do-it-yourself. What can you say this time I want to try a little, namely
transparent natural finishing using products from Propan and the products I used, the first one
I liked the film, I used I was an outstanding seller this is the AS91 which is water-based, then
for the topcort I used topcort acrylux. Yes, like this, yes, acrylux. This is Aa l965 clear gloss
. As for the results, we can see the results. Yes, it looks like pine wood.
Hi and for the brooch, I applied it. twice, as we
know, for the waterbase, it's not as shiny as the clear gloss,
which is solvent, so if you want me this is more than enough, I mean, it's
pretty good for us to use, maybe even selling a mortgage for the application,
friend -friends can see in this video watch this video until it runs out Let's execute it
, and first to get closer, that's all we sanded first with great 240 sandpaper
until the surface is smooth and even and here we have to really pay attention to the level of
smoothness and flatness of the workpiece that we are going to finish and we use happy seller from
Hi, really happy love, I happened to win the microphone, so this seller's happy function
is to smooth the surface of the Udan wood to protect the layer below it and the layer
above it and if we mix it with Lutein we can mix it and we can apply it
before Mustang and after Hussain but in the application in the video I use this as a
cover for wood pores because I want a transparent natural finish and I
don't use wood filler either. So for the application, I did it three times,
Hi Jaan, for sending this seller, I mixed it with 10-20 percent
water then here I brush with the foam brush always The spirit of the surface of the workpiece that
I will be finishing is naturally transparent and this is the first application, yes. And after we apply
it then we wait for it to dry for about 1-2 hours and after it dries we can continue with the
second application, but before that we have to do the pulp again with great 240 sandpaper. you can also
use the great 320 and after that we apply the second application from this sending seller
and for sanding this sealer we can apply it 2/3 times and in this application
I apply three times that's all between layers we sand with
great 240 sandpaper so the difference is applied three times so the first layer
serves to lift the wood fibers so that they are upright so that when we
sand for the second and third applications it becomes easier to drool, so it is
often schiller if we only appreciate applying it once according to Said still
not enough, we need u apply shading schiller 2/3 times and the third time it will
form a flat and smooth surface yes And this I use Grid 240 before
the third application of sanding sealer and of course here it is already very visible yes or already very felt
the film layer formed by I'm glad the seller is lately going to protect the wood and make
the finishing on it better and as usual we wait for it to dry we have 1-2
hours and before applying the top pot we have to sand it again using
great 20 or 320 topcort pulp Acrylux is actually for the April one, this is a shop for the
solid color, actually, but I want to try. How will it be effective if
we combine this Acrylic topcort with about finish because basically both
waterbest should be able to and for this is the clear gloss Yes, as I said earlier
, for the clear gloss, the water base one maybe it's not as fast as if we
want the finishing, dear Fang, because it's melamine or MC or view and so on
and then we move on to the popot step here I use a top waterbest acrylic top pot with a
blouse and I mix it with 10-20 percent water and for the application I
don't use a brush and I use spray. So that the results are smoother and evenly distributed
over the entire wood surface, I spray all over the wood surface and here I
do the application twice and between the first and second topcort layers, don't forget to sand it
using grade 600 sandpaper. Yes, so for this video I only show the first
application and the second application, I don't show it and for the dry time, this hassle is about 1-2 hours and
spring packing is about 6 hours or even overnight and this is the result of a
transparent natural finish. I hope it's useful what you say
and for the results it looks like this, my friends, you can see the result is like this
Hi and it's the original color of wood. It looks like it's the original color and it's a little shiny, can't
use water-based, it's more than enough for home use or maybe you
like it can we sell it Eh, this is a small one, then this is a big one like this Oh yes, if there
is light, it might be a little shiny, but at least it is more protected because
the topcort layer is combined with me, shiladitya forms a film
. suggest for the interior, yes. And if we place it in
STI or or that is directly exposed to rain and sun, it may not last as long as if we
place it in the interior or in the house and the gloss level is like I
said earlier that for the water base it is still inferior it's shiny, compared to
the stopwatch or clear coat that is of the Alfan nation. So if you want that it's more shiny
, friends, you can use it Yes, like melamine or MC or view and so on. Eh Ok,
thank you guys for watching my video, this was the experiment and this is the result
and for the conclusion, the use of two types of protein from Propan which is one clear coat
Nyai topcort is acrylic and what I wow finish for being coquettish is recommended in my opinion so
Brother too The result is six, just forget the criticism and suggestions. If there are shortcomings, I apologize if
there are errors in the presentation of this transparent natural finishing practice, don't forget to subscribe, like
and share and Turn on the bell so you don't get acquainted with our next video, see you on