Go to Beadaholique.com for all of your beading supply needs!
Hi. This is Julie with Beadaholique.com. Today I want to show you how to use this Sizzix
Vintaj
BIGkick embossing machine.
Here's what it looks like.
It's the same on both sides.
It has a very nice handle.
Now the one difference is that the Vintaj logo is at the front. So
this is where you can load your
objects into
and then they're just going to come out the back of the Sizzix.
When you turn the handle you're going to turn it clockwise. It's really easy
to work with.
So this is the main body of your
Vintaj BIGKick.
In with your kit you're going to receive
the solo plateform
which is this item right here.
A nice heavy-duty plastic
platform.
then the solo shim and that's this piece of plastic right here and it just attaches
by being anchored into these
brackets right there which are on either side.
So this is going to go into the machine
like so.
You're also going to get two cutting pads.
This one here you can see there's some
decoration on here. This is actually from
usages. It's from when we've etched a few items already and that's going to naturally going to
occur. It's totally okay.
But when you do receive them they're gonna be nice and clear like this. You're
going to place it
right inside
of the machine on top of
your solo platform and solo shim. You're going to use the platform and shim
together with all of your Vintaj stamping blanks you're going to be
using.
I a couple of example right here that we've already done. You can see that we've
these great little birds.
This here is done with the embossing.
You can see how the nice reversed side looks as well. This might be a better example.
Here's with embossing.
You can see the reverse is just as beautiful as the front.
We've actually taken the Vintaj relief block
and we've highlighted the raised areas.
We'll show you in another video how to do that and also how to use Gilders paste
and even some stamping ink
to really make the details pop.
In this video here I want to introduce you the machine and also how to use the
deco embossed and deco
etched plates.
Here is what you'll get when you order this.
It's going to look like this.
When it's an embossed plate it's gonna have two sides to it
hinged.
When you open it
you'll see the positive and negative of the pattern.
With the deco etch
it's going to have foam top to it. It's not going to have another panel that flips over it.
I have a couple of samples right here where you would actually be able to
embossed paper as well.
So without further ado let me show you how this works.
First off we're going to do the embossed plate.
So have an example right here. I've got metal stamping blank
put out by Vintaj and I just want to capper that little bird there.
So I'm going to put that
blank
on top of the bird.
Easy as that.
I'm going to
flip the lid shut.
Holding this in place, I'm going to show you what the back says, it says place this side down. So
I want that side to be
down onto your cutting pad.
So I'm going to place it hinge
forward
facing the machine.
I'm going to take my cutting pad
carefully lay it on top.
It doesn't have to be exactly even. You can get a little
variation right there. That's totally fine.
All you need to do
is I like to hold down on the top of the machine to stabilize and give myself
a little bit more control
and then you just turn the handle
clockwise.
It's quite easy to work with. It doesn't require a lot of strength.
It comes out the other side.
Let me show you what we've got.
You're going to be amazed at how easy this is and how the great the result is. Open
it up.
You can flex it a little bit if you want to to try to loosen that up but it
does come out quite easily
and there we have our image.
If you really wanna make it pop you're use the Vintaj relief block.
You can see how that will just come to life.
So that is how you use a deco embossed plate.
Now if you want to use a deco etched plate, it's is pretty much the same concept.
You're going to put your main platform into the machine.
put one of the etch pads into the machine as well.
Take your plate. This one
doesn't say this side down but you're going to want that side down.
The foam
facing up.
You're gonna wanna take a stamping blank. Here I have a leaf design which i thought
would be fun to use with the leaf pattern.
I'm just going to
lay that how I want it
and then I'm going to take my other cutting pad. Put it directly on top of it.
You will notice you will get these marks that's okay
There we go.
Same process. Just turned the handle.
And we take it out.
I've got a great pattern
now on your
stamping blank.
If you want to see what happens
the relief block is where it really comes to life.
That is all there is to using the new Vintaj BIGKick Sizzix machine
using the deco emboss and deco etching plates.
Now you don't wanna use any of the other Sizzix products with the metal stamping
blanks. Vintaj has come out with these exclusively for it but you can use
the others Sizzix products in with this machine if you're wanting to emboss paper
or do some of the other fun projects they have for scrapbooking. Just don't use
the metal planks with any other product other than the Vintaj deco
emboss and deco etch plate.
I hope you have a lot of fun with this and join us in our next video as we go
over how to finish these using
the Vintaj relief block,
Gilder Paste, ink and some other great ideas.
Go to Beadaholique.com for all of your beading supply needs!