Hello!
Emery, or as it is also called grindstone, is one of the most necessary machines that
appear in the home workshop.
This is not surprising, since in everyday life, in the kitchen, there are knives that
need to be sharpened frequently and kitchen hatchets.
Blunt knives very badly characterize the owner, since it is on him that the duty is to sharpen
knives.
However, it is not necessary to buy a grinding machine, you can use a sharpening device.
So, you need to mount the drill to the table, similar to the one shown in the video.
You could sharpen everything you need in the house.
However, if you have a grinding table, sharpen knives or tools, a drill or chisel will be
much more convenient and easier.
---- To turn a drill into a machine it is better
to have a drill chuck such as this.
This drill chuck holds the part much better and the probability that the part or device
will fly out of the drill chuck is much less than those that are twisted by hand.
Although, in the presence of a table, this is not terrible.
The table holds the instrument in its place.
I'll show you now One of the options for such a table ,. Basically the table is made of
thick plywood, but you can make it from chipboard.
The design of the table is very simple and does not require any exact dimensions, but
it is necessary to observe the proportions that are visible on the video, for example,
the size of the grinding wheel is important.
Do not try to put a large disk, as it is heavy and when the disk is unbalanced, there will
be a strong vibration of the entire table, which can injure you when a large disk is
destroyed.
It's better to use smaller sizes, it's convenient and safe and such a disk does its job well.
--- The base of the table is made of solid plywood
and fixed to the table with the help of self-tapping screws.
Later, I removed the extra to make the table more compact and elegant.
Perhaps, some people have a question, and why do it - I bought a grinding machine and
that's it.
But I do not want only one grinding machine, but I need five machines with different functions.
I can not place five machines to work comfortably.
It's impossible.
I decided to make one machine with different functions.
I need to quickly change the working tool and the necessary table to it and I get the
machine and a large space on the table for work.
==2 I decided to make a hole in the bottom of
the table so that the garbage could fall on its own and not stay inside the table.
==3 Well, the bottom of the table is ready and
I installed it in place.
Now I will install additional elements.
Additional elements are a stack of parts to raise the grinding table up to the level of
the middle of the grinding stone.
I decided to reduce the area of the grinding table, reducing it from the sides.
You can do the same, everything depends on your imagination and needs.
For example, if you have large parts on a table, then a large table is preferable.
I did it because I'm more comfortable with a small table.
==4 So the installation of the table comes to
an end, it remains to install a few simple details.
I did not show how I did them, I think that any person can do it.
These details are the same, in the form of the letter "n" and are located around the
grinding wheel.
I specially made it so that the table served me as a support not only from the front, but
also from the side and from behind, since the drill has a reverse.
The upper plate of steel, I made a facet in the holes with a thick drill, where there
will be fixing screws., In order for the heads of the screws to be hidden.
==5 Well, the table and the whole grinding machine
is ready.
Now I will try to make something sharp.
==6 The view of the drill is excellent, on a large
lathe, I have, it was not possible to do so neatly.
The chisel also does not raise questions.
Knife sharpening is possible like this.
But in the next video there will be a special device for sharpening knives and scissors.
Thank you for watching and evaluating my videos.
Write about the merits and demerits of this video, by this you will improve the following
videos.
That's all.
See you in three days, goodbye.