We're getting ready to plant some stuff in the hoop house.
And what we're going to do is we're going to hook three Hoss Seeders to one Single Wheel
Hoe -- and I'm going to show you how to do that.
What you'll need of course is three Seeders.
And the Spreader Bar is the Spreader Bar that we use when we put the two 6" Oscillating
Hoes right here so you can straddle the row with the Double Wheel Hoe.
So we're going to use this, several nuts and bolts, the Single Wheel Hoe, and we're going
to make what we call The Beast.
So the first thing you do is you put a Spreader Bar underneath there like that, and then one
on the other side.
Okay you have to put two bolts right here to hold the Spreader Bar so
it doesn't rack backwards or forwards.
We'll do the same thing on the back side here.
And you can just use one on this back one because you got it tied off
on the front.
Now you've got to make sure when you put it on that you adjust so you've got enough room
for your depth adjuster there
to fit right in that slot there.
Okay, so when you're setting these other ones up on the outside, you can adjust.
If you go all the way out, you're going to be at 12" from center to center -- actually
about 12 1/2" is the most you can get out of it.
So you can get 12 1/2" and 12 1/2" spaces.
But today I want to go a little bit closer than that, so I'm going to move them in to
about 8" spacing, and that's what that is right there.
You can go as close as 7" spacing, so you'd have 7" here, 7" there.
Okay so I've got it all together now and what I'm going to do is just tighten all the bolts
up and we'll be ready to roll.
So I've got three Seeders set up on a Single Wheel Hoe.
Now you could also set these three Seeders up on a Double Wheel Hoe.
It really doesn't matter.
The reason we're using a Single is we've just got one wheel out in front instead of two.
But if you put two, you wouldn't have to worry about your Seeder following the wheel.
It would be offset.
We've got these set up on 8" centers.
You can up to 12" centers and as narrow as 7" centers.
As far as a Row Marker goes, you could set up a Row Marker on each side so that you could
mark your next row off.
Or simply take one of our Cultivator Teeth and put on each side to mark your row.
What we're going to do in the hoop house is we're going to lay off strings and run strings
down through here.
You can plant all three of the same crop or you can plant different crops.
And what we're going to do is probably have a different crop in each hopper.
If you're interested in growing your own food, we plan on making a lot of videos to give
you tips and tricks on how to do that.
So if you like our video, make sure you subscribe to our channel and thanks for checking it
out.