This video is designed to a be a guide.
Please note that other complications may exist, that aren't addressed in this guide.
While we always strive to provide accurate and detailed information, we can't guarantee
that it will fix your TVs issues.
ShopJimmy is not responsible for any harm that you may cause to yourself or damage to
your TV, during the repair process.
Try all repairs and troubleshooting at your own risk.
Be sure to take all of the proper safety precautions.
In this video, we will show how to replace the LED strips, that have the part number,
BN96-25300A.
The part number that you will see on each strip is 25300A, near the bar code sticker,
as you can see on the screen.
These strips can be found in the following TV model numbers.
These models can also use different LED strips, so always be sure to purchase replacements
for these models by matching the part number.
This can also be used as a general tutorial, teaching how to replace LED strips.
When replacing LED strips, you will have to remove the panel.
Removing the panel can be very difficult as the panel is extremely fragile.
If your TV panel is damaged or in the replacement process, you will have to get a replacement
TV.
In this TV, it is necessary to remove the plastic piece on the back of the TV, and then
disconnect the cable that is connected to the back cover, and the main board.
Our TV already has the plastic piece removed.
Disconnect the speaker wire from the main board and then remove the speakers from the
TV.
Disconnect the ribbon cables from the panel.
Remove the covers of the scan drive boards.
Use a flat head screwdriver to get in between the bezel and filter frame, to separate the
bezel from the chassis.
After all of the clips have been loosened, lift and remove the chassis from the panel.
Lift the panel out of the bezel.
Fold up and tape the scan drive boards to the panel.
Use two plastic sheets or multiple sheets of printer paper
to get underneath the
panel
and lift it.