This video shows how to install the HP 1200w Wireless Mobile Accessory on an HP mobile printer.
We will also show how to use your mobile device to print a document
using the HP Officejet 150 Mobile All-in-One Printer.
The HP Wireless 1200w Mobile Print Accessory provides wireless printing from a mobile device
to an HP mobile printer,
a great solution for professionals who need to print documents on the go.
Here is the HP 1200w mobile accessory.
It might be helpful to identify the hardware features of the device.
The device status lights are located on the top.
This is the multifunction button.
The power port and two USB ports are located on the back.
This label shows the Service Set Identification, or SSID, for the 1200w.
Before you get started, make sure your printer has the latest firmware.
From a browser, type hp.com/support in the address field.
Then, select your country and language.
Next, touch Drivers & Downloads.
On the Drivers & Software page, type your printer model number and touch Go.
Then select your printer model from the results list.
Select your operating system and touch Next.
Scroll down the page, and then touch Firmware.
Touch Download and follow the onscreen instructions to complete the download process.
The first step is to assemble the power adapter.
The power adapter comes in two pieces, a base and a regional specific plug.
Insert the power adaptor for your region into the power supply.
Plug the power supply cable into the 1200w.
Plug the power supply into a wall outlet.
Next, turn on the printer.
After turning on the printer, the control panel options appear.
Connect the A plug of the USB cable to the 1200w.
Then connect the B plug to the printer.
The 1200w indicator lights will show green.
To verify the print connection, press and hold the multi-function button for two seconds,
then release it.
The blue light blinks, and a configuration page prints.
Note: If the multi-function button is held for 14 seconds,
it will reset the device to the factory settings.
Now you're ready to print from your mobile device.
This video shows how to print from an HP ElitePad, an Apple iPad, and an HP Android tablet.
With the ElitePad open and running, make sure the indicator lights on the 1200w are green.
Open the Settings charm, and then touch Available.
In the Wi-Fi settings, select the network. name, and then touch Connect.
Open the document or photo that you want to print.
For this example, we will print a photo.
Open the Photos app and select the photo you wish to print.
Open the Charms menu and select Devices.
Touch Print.
Then Touch HP ePrint.
Touch Print again.
Touch the prompt that displays in the upper corner.
The desktop opens.
Touch Connected, and then select HP-Print-D8-1200w Mobile Print network.
Touch Print. Your photo prints.
With the iPad open and running, make sure the indicator lights on the 1200w are green.
Touch Settings.
Under wireless settings, select the network name.
Open Safari and type the IP address that was provided on the printer configuration page
in the address field.
In the settings page, touch Home.
Then select the Setup Wizard.
Follow the onscreen prompts to set up the network connection to the printer.
Touch the HP ePrint app.
If No Printer Found message displays, touch the button.
Touch the printer name.
Now the printer name appears.
Touch Photos.
Locate the photo you want to print.
Touch Print.
The photo prints.
With the Slatebook open and running, make sure the indicator lights on the 1200w are green.
Open Settings.
From the Wi-Fi list, touch the network name.
Then touch Connect.
Open the HP ePrint app.
Open the document or photo that you want to print.
We'll select the flower photo.
Touch Print.
Touch Print again.
Your photo prints.
You can find additional helpful videos at hp.com/supportvideos
and on our YouTube channel, youtube.com/hpprintersupport.