friends, hello to all, today we’ll work with such an old hatchet that
I came across, of course, it apparently lived for some good time, it’s not a good use of such
metal, it seems to be nothing, but I don’t know if it’s chipped away, you see everything here, and
it’s not clear how it was impaled . I decided to transplant it in an interesting way which
seemed to me one of the best I have tried. enjoy watching everyone, let's go,
as we see here, the handle was even without something without some kind of wedge
, you need to bring it into a human form
, in general, I put a little sting on the grinder rudely, now
it was decided that these parts will probably still be done on a grinder
friends in general, I didn’t have a goal to polish it to a shine, but just removed the rust a little, gave
it an appearance, now we’ll remove it inside, it will be necessary to remove all the rust
friends, in general, I removed all the rust, here I smoothed it a little around the edges so that the handle would
go in better , I bought such a birch handle, of course it doesn’t go in a little, you need to grind
it, but you need to grind it so that it goes straight in tightly with a clog, I’ll grind it a little on the grinder
, so I grind the handle, it’s first inserted a little here, but then just
hammer in, we won’t take it until we take it a piece of rubber a little under the blockage, it doesn’t clog further, it
will simply absorb it, so it’s not for clogging, you need to
press it in with something, other I had to pull it out, I forgot to lubricate it a little so that it would go in better
, I use the usual lithol lubricant, and then everything is the same as in the first case, we insert it,
we bait it a
little, so that it will depreciate, it won’t go in very quietly , it’s coming in,
and
now I’ll raise the house
, but she we already have everything, it's out. this is how it looks, well, really, I crushed the handle a little, but this is bullshit
, we will undermine it, but it is pressed in, you can, of course, do it with any kind of hydraulic press
, and with such an effort, the emphasis was on the pile, twisted and the substrate and crowbar with the help of
crowbar squeezed it well with a lever, now it’s definitely not going anywhere, we’ll cut
it off now only if it breaks, it breaks somewhere else, but it definitely won’t fly out
now, we’ll process it, and we’ll process the handle in the same way,
well, I sharpened the ax a little, I didn’t try to
make it razor-sharp, but so that at least a little bit was to be cut
now now we will make the handle, as always with wax, heat the handle
a little, apply wax
and also
heat it up a little more, wipe
everything well, the handle is well saturated.
and paint
everything, leave it to dry
to friends, as a result, we got such a hatchet, I think now it has no demolition.
here I did not paint because that is the cutting part, the chopping part does not make sense.
I painted it over here so that moisture does not dry out less, and I think it will last a very long time, why I’m so
sure I’m a year ago, I just hammered the rubber in the same way, you can even see that the rubber is already
fighting me off in a circle with a lot of nails hammered working and it still serves and
has never yet flown off it will break here faster than it will fly off the rubber,
so I am one hundred percent sure, especially since I didn’t score here, but here I pressed it in under great
effort, I think it will last a long time I hope the video was useful to you and interesting, but as
always I want to say thank you so much for watching me, for supporting me, and I
wish you all good health, all the best and all the best, until we meet again, bye bye