Hi, DIY-ers!
It's Sterling with AlarmGrid here.
Today, we're going to show you how to program a 5802WXT-2 personal panic button.
This 5802WXT-2 is very similar to the 5802WXT without the dash two.
The only difference, being that the dash two has two buttons, and the 580 . . . I'm sorry,
the 5802WXT only had one button.
So this is better for false alarm prevention.
Instead of being able to accidentally press and hold one button to activate the sensor,
you would actually have to press and hold two buttons which should limit false activations
if it's in a purse, or a pocket, or somewhere where something could get knocked up against
the sensor.
In addition to the actual panic switch, you get a couple of wearable options.
You got a nice little holster, that you can snap it into.
This can slide into your belt, and then . . . touching your belt, you would have an option to activate
your device.
You have a lanyard that you could wear around your neck, and has a nice little piece of
cord here, that hooks into here and loops around so you could wear it around your neck.
Beyond that, they give you a nice wearable watch band, so you could snap this into place,
and you could wear this on your wrist and have an easy way if you're working and you
need both of your hands, you could still have a way to activate the device.
So this is a great way to add further value to your system, instead of just having intrusion
devices, which detect and alarm when something occurs.
This one is self-activated, so that you could set off a loud alarm at the panel, or a silent
alarm in case of an intrusion . . . unannounced intrusion in the home.
So now that we know how the 5802WXT-2 works, we're going to show you how to program it
to your Lynx touch panel.
Just like with any zone programming, we use security, more tools, and then the installer
code of 4112 to access this screen, and once we hit program, we're into the system programming
screen.
We can see that we are in that screen because it shows specifically, system programming
at the top.
We go into zones to program the device, and we hit the down arrow to get to the next available
new zone.
We highlight it, zone number 22, every device typically gets learned to its own zone, and
we hit edit.
From here, we have to key in the serial number for the device, and we can do that because
we have the serial number displayed on here.
We also have a sticker on the box with the same serial number.
You ignore the A, alpha number- or letter, and you would only type in the seven digit
serial number.
Instead of typing it in though, which you may have user entry errors, and then it wouldn't
work, what's better is to auto-enroll it by pressing and holding these two buttons, which
would activate the device.
Doing that once makes it beep, doing it twice makes it double beep.
Well, it is a press and hold, I didn't press and hold long enough the second time, but
pressing and holding for the two second pause, you get the double beep, and you get the serial
number, 0992947 with the applicable loop number for this device.
Loop number one should always be used with your panic button, and then one final press
and hold to activate it a third time.
It takes us back to our zone 22 programming page.
So now we have to choose device type, in this case, we're going to set it up as a medical
panic.
We had our one button set up as a police panic, in case we heard something in the middle of
the night and we wanted to get response.
This one, we can give to a family member who may have a medical emergency, and they have
an option to press and hold, and get the 24 hour auxiliary alarm type, which the central
station knows would be a medical alert.
If we cannot get in touch with the end users, then we would know to send the ambulance.
If we go here, we can say medical.
Actually, it already say medical here, so we probably want to clear that and just say
panic, and now we have panic, medical when this is triggered.
We want it to be alarm report yes, which means if this device is activated, we want it to
send that information through to the central station.
If we had this selected to no, it would only sound the local alarm so that if you had a
caretaker, they would know okay, there's a medical emergency, they better go check on
the patient.
In this case, we would like it to go through to the central station because our system
is monitored and therefore, we want all our alerts going through to a live operator.
Finally, we have the option for supervised.
We showed on the 5802WXT video, that sometimes a panic button . . . it is applicable to make
it unsupervised.
If you're going to leave the property with the device, when the panel would check for
the device every 12 hours, if you are at work with your panic, you would get a trouble onsite
indicating that this serial number device is not being seen.
So if you leave the property with the device, I would recommend unsupervised.
In this case, our elderly family member stays in the home all the time, and therefore, this
device never leaves the property.
And we want it to be supervised, meaning the system will check and look for this device
every 12 hours.
If it didn't see a check-in message from the signal of the . . . or rather of the sensor,
then you would get a zone 22 supervision trouble, and you would know that either this is too
far away from the panel, perhaps the battery's gone low, or perhaps something has been damaged
and the sensor got wet, or whatever might have happened, and therefore, you would get
alerted to the issue prior to when the patient needed to activate the alarm.
By saving it, we're locking in our settings and if we exit to the home screen, we can
test to make sure we learned it in properly.
So, from the home screen, if we press and hold both buttons to activate the device,
we get a medical alarm.
You can see that the icon for the medical alarm has the universal ambulance symbol to
alert you.
Anybody looking at the panel would know that it was a panic and a medical emergency, not
a police or a fire emergency.
And if we disarm one more time, we're back to the ready to arm screen, and we know that
our 5802WXT-2 two button panic has been properly programmed to our Lynx touch L5200 system.
We hope you've enjoyed the video.
We invite you to subscribe to our channel, and if you have any questions for us about
your Honeywell sensors or system, please email us at support@alarmgrid.com.