What's up everyone and welcome to my channel my name is
Nicolas Marion and on this video we'll do the setup the instruction, the guide
the calibration of the Jebao auto dosing pump
and this is the DP-4 Auto Dosing pump from Jebao and so we'll do first the
calibration and then we'll do the instruction how to set up the dosing so
the first thing that you need to have before doing the calibration of the
dosing pump you need to have like just a bottle filled of water this is tap water
they said that you should use RODI water for now honestly I have no
clue why you should use that I don't see any different it could make you can use like
a bottle with a mark of the hundred millimeters like this this
is usually what we have in the kitchen you can use that with just the 100ml mark important
but what I did is, I just bought on Amazon a more precise
cylinder so you can see there's the hundred millimeter mark so this is
specifically made for this kind of setup and after this you need like
obviously the air tube like this personally I use this kind of stuff and
never I had any issue with that it's like it's super smooth super flexible it
work pretty well so I recommend this if you are looking for one
and after this you can you can start to do the dosing calibration so the first thing that
you need just before doing the calibration
you see those bump try to open all of them and just look inside of them
because it might happen that you have like the yellow silicone during the
transport and over time you may have like a the silicon like just stuck with
the one of the three cylinder that is inside of the pump so make sure like you
just unstuck with your finger those thing and because it happened like there
is like some confusion why it's not working that's because why, so just open
all of them just make sure like they are all correct
after that is done you can use we need like there's air inside of the the tube
so we need to get rid of the air so what you can do personally one of the trick
is this like just more easy I just have the tube, this is what I
use like I have like a flexible tube this is my dosing bottle for my reef
aquarium and just make sure that the end of the tube is in the bottom of the bottle
so you don't want any air and goes like inside of this so what I do I'm gonna do
the calibration for one but it's just I'm gonna going to auto run this to fill the tube
with water so you'll see I'm gonna press one and I'm gonna set up so you can see
now there's obviously some air that are obstructed, all of this is air and
you need to get to get rid of this so make sure like you run just a pre-
calibration and you can sometimes see there's like
air stuck like over there so I'm gonna wait until it really feel like this and
just wiggle a little bit the tube because sometimes there's like air that
are stuck in this area so you just wiggle the tube like this and sometimes we'll
just like get rid of the the the air so you can't see right now while I was
speaking to, seem to be fine there's no air inside of this so
the next thing you need to do, just I'm gonna stop the pump over there
put that back in the bottle of water, and one thing I need to mention is like if you do this
this is wrong you shouldn't run the tube inside of the cylinder because this
is all of this is the volume that take place inside of the cylinder so instead
of putting like it's going to calibrated correctly so you can use like
um just a clip like this and i'm going to stuck it like so...
So I just make sure the tube is over the 100
millimeter mark so you gonna have like a more proper calibration like this
all right so now this is done, we can setup the calibration so you can press, just
open the Dosing Pump by pressing like the middle button the UP sorry and you're gonna
have the calibration menu so this is all the pump you can have 8 pump if you buy
another one so I'm gonna use only this one for this example so this is already
selected select like this and I press middle button and after this all you
have to do like this is all right this is all right
alright so you can press the whoops you can press the UP button like so so
right now we're gonna filled the cylinder and once it's done I'm gonna
press the UP button to make it stop so I'm gonna just watch until it's got the
100ml mark
there we go so right now, this pump is calibrated so you can press the middle
button and you can select all the other one of the other pump to calibrate
so and this is what just an example for this so now we can jump to the
how to setup the Jebao dosing pump, so just pretend this is your whatever that you are dosing so I'm
gonna just press escape and just pretend this so just pretend this is the inside
of your aquarium, i'm gonna remove the water actually.
so the first thing you can do to setup the Jebao Dosing, i don't know if you can see, alright
so the first thing you can do is just press the middle button so we can set the date
and time press middle again so you can setup with the upper arrow the day
and just like so you can just change the date so for me is that date is fine
you can after this you press the middle button and you can reach the
hour and this is actually good for me you can just use the arrow like so
but for me it's already all done so I don't really need to do that so I press
the middle button to set program okay I'm gonna select this one the number one
So with this you can setup during a day
you can set up like every hour it will dose this so this is what it say
so I just dose for one time per day like this so for me it's fine
I press the middle click after this you can have like let's say you want to dose
every week, every three day, every fourth day up to you
for me it's every day so I'll just 0 like this so this is one of the option
you can use it all the click after this you have the volume so right now this is
like was actually for my alkalinity of my reef aquarium and it was set to 31 so you
can use the UP/BOTTOM but you cannot, once you each the nine you cannot go like
higher so if you want to have like four over there
you have to just select the left arrow and then use the arrow back so um yeah the
Dosing time, so I dose my stuff at noon so you can just setup like a at
1:00 p.m. 2:00 p.m. whatever or during the morning
that's like up to you so I'm gonna set up at midday and that's pretty much it
like this like really that simple so after this you can set up for individual
each pump like this so I hope this video is like a super sharp, on point
and if you like this video please leave me a like and if you want to enjoy more
content of this kind of stuff so just subscribe and then thank you for
watching, I will see you in the next video, bye bye :)