hey everybody this is PJ Reiley from Lancaster Archery here in our studio with Brandon Reyes from
TRU Ball/Axcel and Brandon we've got the brand new Axcel AVX Scope system lots of parts here
this thing is awesome i believe we're gonna we're gonna set it up like you would set it up for 3D
just to show all the different parts there's many configurations but let's talk about this
thing because it is awesome correct well this is a new product for 2022 the AVX scope system
um it can accommodate any type of archer from hunting to target to you know 3D whatever i'm
sure there's some uh configuration that will fit for uh any archer the scope you see here
uh displayed is a 31 millimeter uh it'll also be available in a 41 millimeter as well um cool thing
about it is ambidextrous right or left-handed fits everybody the bubble you know simply switches from
one side to the other and then you got all the options so um ideally for someone like myself
that shoots a lot of 3D yeah i'll run through and show you how to set it up you know typical for
a typical 3D person um and show point out some key features as we go through sure so the first
thing with just the housing you see here this is set up with our typical t-connector system
it's slightly different than our previous AV model you'll notice a hole in the side of it
now oh yeah and i'll show you how we'll run the fiber through there for a secondary light source
in a moment but one of the other cool uh features that's new for the our scopes is the uh the lines
inside of the housing see that so the housing lines what that does is uh that's gonna reduce
any unwanted glare right should you see the the scope slightly off-center so uh that's a new
feature the texture uh texturized feel look kind of looks like threads right inside of the housing
but it does have a purpose and that's the purpose is to uh to eliminate any unwanted glare so um
also briefly on uh while we're on the housing here you'll see that uh there's two sets of screws
in the top here this is called a level blank so this uh is just a simple little piece of aluminum
that closes off any unwanted holes at the top if you don't want that right you can take it out
if you want more light coming through and of course put it in if you uh want to keep it in
on the bottom here uh the the level bubble is also replaceable uh with uh to be able to
move from one side the other with these two uh flat head screws uh so you simply take those out
to move from one side of the other this is a standard eight millimeter level uh it's slightly
longer than our bubbles that we currently make uh on our scopes or on our hunting sites um slightly
longer so it's a little different and then the level blank you if you took it off this side you
know you're switching to left hand you would just put it in the top correct double in the other side
okay so uh with that i'll go ahead and uh and put the pin in and show you how that locks in place
so uh if i got just a housing the next step to go in is either going to be a ring pin or
this spacer here depending on if you're using the ring pen or not this is going to take up the space
if you don't use the ring pin i use the ring pin so we're going to go ahead and install that
nice thing is it's you can put it in different positions just like you know before there's four
different places that'll lock in i prefer nut pins so and most most shooters do like the up pins so
they're going to come in from the bottom like that okay so as i mentioned the fiber and the tubing
going into the t-connector hole now uh we simply slide that fiber and that tubing into
that t-connector hole and this gives our fiber protection
as we run the secondary light source through the 8/32 hole here yeah on the side so the next piece
will be our little lock here that's going to lock the ring pin in okay so this uh
either is going to lock that ring pin in or our blank there
and uh now if i wanted to use this scope without a lens i'm set i've got my pin uh and it's ready
to go right i use a lens so uh the next piece that's gonna go in uh is this lens spacer
and in our previous scopes we had a lens frame that's been eliminated with this so it's just that
lens spacer and then you can drop your lens in and this lens is 31 millimeter or one inch and five
eighths inch and an inch and five eight inch up three eight and some three eighths one of the two
yeah whatever we have now yes so then this all has to be held in with the lens retainer okay so again
at this point i'm locked in my scope is usable with the lens and the pin yeah and then it comes
down to choice of hoods half hoods you know whatever you want to use right these would
be your front if you wanted like a step down shade or if you just wanted flat yup you could put those
on front and as you mentioned on the back yep i generally in most cases i'll use a torque ring
indicator on the front with the white ring um and lock that in and then in most cases i like a small
you know a long this is a long the longer hood yeah but i'll use the longer hood and that would
be the completed version of it complete scope right there that's incredible and now while we're
talking about it because we did mention okay up on top here we have this other hole tell us what that
would be set up okay so uh the new to our scopes is a 8/32 hole on both the top and bottom for uh
right or left-hand shooters uh but i'll dismantle this and show you the intent of that so that's
going to be used uh specifically with the lens only right so for an archer that wants to use a
illuminated dot a center drilled lens with a fiber or something that they want to
illuminate in the middle of the lens say an etch or something
we're going to now use this spacer and then lock that in with this retainer and then now
drop our lens spacer in our lens in and lock that in so now i'm just i've just got a scope housing
with a lens in it this hole this 8/32 hole in the top or the bottom depending on if you're right or
left-handed is going to specifically shine on the center of that lens gotcha and you know light up
whatever the etch the pin uh the dot whatever you want to do um so for someone that wants to
light up a pin they're going to want to use the method over here with the 8/32 screw in
the back here with their light source and then this one is the 8/32 that shines directly onto
the lens yeah so that's specifically new for our stuff yeah but it's something we felt that would
close up some loose ends on you know archers that may use that style and they didn't use our product
but now they may all right and then so lastly Brandon then this barrel this is gonna you can use
this on any of your Axcel compound correct yep all of our sites except this barrel or the t-connector
this site or the scope rather will also come with the 10/32 threaded rod that will fit any
site gotcha awesome that is the brand new Axcel AVX entire scope system Brandon we appreciate
your time today if you like this video give us thumbs up if you want to see more videos like it
subscribe to our youtube channel don't forget to click that bell to get notifications whenever we
put out new videos and as always if you have any questions you can visit us at lancasterarchery.com