The material uses a stainless steel wire with a thickness of 1.2 mm - 1.6 mm.
Firstly make a 3.0 mm - 5.0 mm loop.
Mark with a marker 10 cm from a loop.
Make a loop to use a sinker on the marker mark.
The size of the loop is 6 mm - 10 mm.
The angle of the two loops must be at 90 degree angles.
Make a loop at 16 cm.
The size of the loop should be made according to the size of a swivel. Make it between 10 mm - 15 mm.
Angle the two loops to make it easier to move the fishing line.
Attach a fishing leader line to the large loop.
To the small loop, connect a fishing main line with rubber beads for anti-impact.
This is the completed rig with a triangle boom.