In this video,
we'll show you how to connect your Canon imageCLASS MF3010 to a Mac®.
Let's get started.
First, make sure that your printer is plugged in and powered on.
Be sure not to plug in the USB cable
until you're instructed to do so later in the process.
Go to the Canon website by visiting
USA.Canon.com/support
Search
for your printer model,
and look for the available driver and software downloads.
Verify that your operating system is detected,
then select and download both the printer driver
and the scanner driver.
Once the drivers
have been downloaded, they'll need to be installed.
Start by installing the printer driver.
Double click the downloaded file to get started.
Double click
the package icon.
When the printer
driver installer appears, click continue.
The software license agreement will appear.
Read the terms and click continue.
If you agree to the terms, click agree
click install.
You'll be asked to enter
the username and password you created when you set up your Mac.
Enter your password
then click install software.
The installation will begin.
This may take a few minutes.
When this screen appears, click close.
You'll be asked if you'd like to move the installer to the trash.
You can click keep, or move to trash.
At this time,
you'll need to connect your printer to your Mac with the USB cable.
Once the printer and Mac are connected,
open system preferences
and click on printers and scanners.
Your printer should be listed.
If it's not, click on the plus sign
and select your printer,
then click add.
Next you'll need to install the scanner driver.
Open the downloaded file
and double click the
package icon to get started.
Click Continue.
The software license agreement will appear.
Read the terms and click Continue.
If you agree to the terms, click agree
click install
when prompted.
Enter the username and password for your Mac and click
install software.
The scanner driver will now be installed.
This may take a few minutes.
When this screen appears, click close.
When asked if you'd like to move the installer
to the trash, click keep or move to trash.
Congratulations!
This completes the setup of your MF3010 to a Mac.
You're now ready to print and scan.
For additional assistance with functions of your MF3010,
such as how to scan and how to copy please see our other videos.
Thank you for watching!