Hi everyone, Welcome back to geardo,
Today we will show you how to replace the lcd screen on POCO
X3 GT Aka Xiaomi Redmi Note 10 Pro 5g Mobile phone for repairs.
To start, we need to have the right tools to proceed with the repair,
which You can find in the description.
First, turn off the phone, and then follow the back cover removal.
To remove the back cover, it needs to heat gently
around the rear cover edges until the pasted adhesive becomes soft.
For this, we are using a heating pad. Place the back cover side on the heating
pad and Select the mobile phone HEATING option and leave it till it completes.
Alternatively, you can use a heat gun or hairdryer.
Once the heating has completed,
Use a suction cup to create an opening between the frame and rear cover. Next,
insert a plastic card pry tool or something similar to cut the adhesive around the back cover.
Take out the rear cover and remove the midframe by
undoing 16 screws from the top and bottom sections.
And then, Using a plastic card pry tool, create an opening to separate the back cover frame.
Be gentle and workaround on the edges to separate the plastic clips.
While taking out the frame, be gentle; the fingerprint plug connects with the
mid-frame. Disconnect the flex cable to release the midframe from the body.
And also, disconnect the battery plug.
Next, take out the battery by loosening the adhesive
and disconnecting the secondary battery connector.
loosen the adhesive on both sides, and then lift it using the tab,
Next, take out the main flex by disconnecting plugs from both ends.
Next, take out the speaker buzzer from the body.
Next, Take out the charging port flex by disconnecting two antenna heads.
Next, apply little heat and take out the vibrator motor from the body.
Next, loosen antennas and pull out the logic board from the body.
Next, apply little heat and take out the Earpiece & button unit from the body.
For the replacement, there are two different screen types in the market. The one is with
the frame, and the other one is without the frame. It can be original, used, or aftermarket.
Either version you choose, you can get with the frame and without. But the most
straightforward repair will be with the frame, and also, the price difference is not that big.
I would recommend you to go with a screen with a frame & buttons installed. It can be original,
refurbished, used, aftermarket. And this type is commonly available to purchase.
Next, on the new screen frame, start placing removed parts.
Next, Place the button flex on the frame.
Next, Place and secure the logic board on the frame.
Next, Place the antennas on the frame.
Next, Place the vibrator motor on the body.
Next, place the charging port board on the body and secure antenna heads to the board.
Next, place the loudspeaker on the body.
Next, Place the main flex on the body by connecting from both ends.
Next, Place the battery and secure adhesives and the secondary connector.
Next, connect the fingerprint plug and secure the mid-frame,
and then turn on the device for testing.
Next, secure the mid-frame by adding thirteen screws.
Before installing the main back cover, make sure it has enough glue on it;
if not, use B7000 glue or a new double-sided back cover adhesive.
Finally, we are adding binding clips to tighten the rear cover with the body.
If not, you can use some rubber bands and Leave them for some time.
I
hope you have enjoyed the replacement guide.
Let us know if you have any questions. Please, like, share, and comment on our videos.
DO not forget to hit the subscribe button.