HI DIY-ers!
Sterling from Alarm Grade here and today we're going to show
you how to set up and use your panic alarms for your Lynx Touch L5100
security system.
First of all, the panic alarm is this button right here on
your keypad.
If you press and hold it for five seconds, it will switch over
to the panic screen and you have icons for police and fire.
This is how the system ships as default.
Panic for silent police and fire are both turned
on by default.
There is also a medical panic available but you do have to
enable it through programming.
What we're going to do is show you how to program them and then we will show you how
to trip them.
First of all, you have to go in to your zone programming section, through
installer mode programming.
You hit more, tools, enter your installer code
which is default 4112.
You set up your panics through the zone programming.
You need to go into program option.
System switches over to system programming.
You click on zones, and by default fire is set to zone 95 and
the silent police panic is set to zone 99.
You have to hit the down arrow.
Scroll all the way through the available 64 zones, then you have your
temperature zones for thermostats, and then finally the last three options
are 95 fire, 96 medical, and 99 police.
As I said before, fire and police are already turned on so you really don't
need to change it.
If you did want to make sure yours was on you would choose
fire, click edit.
You can see there is no zone description because by
default it's already showing you the icon.
There is no zone description needed.
There's no serial number, because obviously it's not a wireless
sensor like your other zones.
It's set to default fire with no verification, alarm report is set to yes.
That's what I mean by it's on by default, it will send the signal to the
central station.
Supervision is set to panic trigger meaning there is no
supervision needed, because again, it's not a sensor and there is no chime.
Everything is set up properly.
If we back out and we go to medical, which this one is not on by default,
we will see that device type is medical, response type is not used.
If you want to enable your medical click into it.
They give you two options auxiliary, 24 hour auxiliary or 24 hour audible.
Both of these are 24 hour zones.
They can be tripped if the system is armed or disarmed.
Basically auxiliary will make so that just the key pad
beeps.
Audible will make so that the full alarm goes off.
For medical most people use auxiliary.
If someone has a slip and fall, or there is a
medical emergency in the house, you don't need the whole siren to further
complicate the issue.
You just want the keypad to beep and you want the signal
to go to the central station, so we will choose 24 hour auxiliary.
It is already set for alarm report so if your system is monitored this
will send a system to the central station when this panic is triggered
and we finally make sure we save it.
Before we exit out we're going to show you that police is also
own.
Police is set to 24 hour silent by default.
If you'd rather have this be an audible alarm.
Say you're home, you hear a window smash, you want to
have the alarm go off to scare away the intruder.
You can toggle this over to 24 hour audible.
Save it.
And if we back out of programming, making sure
we allow installer to reenter when we exit and we go back to the home
screen; now when we press and hold the panic button we now have all three
icons because we've now enabled medical.
To have it trip all you do is you hit the icon.
Alarm is going off.
We have our system on test with our central station
so no response is coming out, but normally that would have police on its
way with no verification calls needed.
Because of the nature of how you trip this alarm, it's not going to
be something that you do by accident.
We normally recommend that when people get monitoring for their Lynx Touch
that they have us send out the authorities right away when any of the panics
are tripped.
People are worried on normal keypads that you may inadvertently
hit the panic.
On Lynx Touch it's much harder to do, because again,
you have to press and hold this for five seconds and also a second action
of triggering the specific panic that you want.
We just did the police which is full alarm.
We will show you how the medical just does the keypad
alarm.
Just timed out on me.
Go back in.
When we hit medical, different tone, just the keypad.
That is how you set up and use your panic alarms on
your Lynx Touch L5100 System.
If you have any questions on setting up or using your panics please leave
us a comment below and make sure also to subscribe to our channel for
future videos.