This video tutorial is about how you can restore truetone without the original LCD.
The original LCD is missing in my case.
if you have the original LCD then you can easily copy the truetone data without any
problem.
Here you can see truetone is missing on the control center and on settting too.
I am here using jcid programer.
open the program and log in.
Connect programmer
Insert the LCD that needs to be programmed and connect to pc.
If ask trust then trust device.
Now go-to option chip repair Click on fix truetone
Wait for some time this may take 1-2 minutes for the process.
Wait till fix truetone option highlight.
Mtsn data read from iPhone and calculated by the device.
Now ready to write truetone data don’t disconnect Cale from iPhone.
Remove
touch from iPhone that data preserve on touch side.
Connect touch connector to programer
Now click on fix truetone.
Now you can see programming on the process.
Finally, write success message shows disconnect Cale
power off iPhone connect touch connector
If you don’t connect Earspeaker flex True Tone not showing.
Now you can see truetone was successfully restored on aftermarket LCD
If you change the original LCD from another iPhone then also you have to write
truetone data.
If you have any queries about the video feel free to comment below we will respond to your
comment as fast as possible.
If you fix your stuff with the help of this video then drop your feedback.
If you get even a little bit of value from this then do like to share this video.
Subscribe to support us, Bookmark our channel on your default browser.
Hello everyone this is Akash from thegsmsolution and Peace out till the next time.