friends, a big hello to everyone, I think everyone has such a jigsaw, not necessarily from this company,
but preferably, and now I think that everyone knows that it is intended for curved cuts of exactly
lines, we can’t do it now, of course, I’ll quickly demonstrate it
and here’s how no matter how hard I tried to withstand it, it’s still clear that it’s not even
, of course it can be fixed, we take a flat surface and
if you have a milling cutter, of course, you can easily fix everything to make a smooth surface
and we have an even, ideal cut, but this is of course if there is a milling cutter and if there is no router, only one jigsaw, now we
will make one small fixture from the same plywood, we take some kind of stick, we substitute a plank,
I will also use the fifteenth plywood, this is a factory cut
, I make markings in the center along the square, I draw a straight line with an awl on the core, I take a Forster drill and I make a through hole,
also using a square, I draw lines, but not in the center, but offset closer
to the edge of the
plywood, dissolving with the help of a sawing machine, I get an even, perfect cut
; now, of course, I try on our workpiece on a jigsaw on the reverse
side
; for this,
the ryobi brand sawing machine will not help, of course, I’m not a professional, and since the strength of my legs is the very first on the machine
, it is possible to adjust the angle of inclination up to 45 degrees. The depth of cut at an angle of 90 degrees is also easily adjusted . The maximum cut of 80 millimeters can be
easily increased using two guides.
the desktop area is also made of aluminum here increased strength
and wear resistance and a smooth and even surface ensures an even flow of material the dimensions
of the desktop are 560 710 millimeters for my purposes it is right behind the eyes in the configuration it has parallel
guides with front and rear supports that gara nitrates the accuracy of cutting wooden blanks , I
have a sawing
machine of the component of the bed, and transport wheels are also provided,
which guarantees convenient movement around the workshop on my own ;
I glue
two pieces of adhesive tape and cut them off after I remove the protective film, but I’m not in a hurry and stick it again,
carefully checking it’s not without reason that they say measure it seven times once, cut it off after checking
it, glue it well and check with a square, the jigsaw blade should be flush
with the plywood, now removing the plastic protection arming with a screwdriver, using a grain
of 2 millimeters, make three through holes, then on the plastic all three holes are countersunk
after assembly, of course, I checked everything evenly , I
press the plywood board with key clamps, and now, of course, we test our fixtures as
a result we see an almost perfect even spiele
friends so the idea is fully working to achieve almost perfect beer with the help of dilogy who
liked this video be sure to thumbs up write your opinion and see you again bye bye