Go to Beadaholique.com for all of your beading supplies needs!
Thanks for joining us here at Beadaholique.com as we've learned how to use to use transfer sheets.
Here are a couple examples of some jewelry pieces that have been made using transfer sheets. You can
see here that
we've used some of the word transfers which are a lot of fun with glass domes.
Here is a wood pendant that has a transfer sheet. I wanna show you this because you don't
always have to go to the edges of your setting. You can go ahead and have a
lot of smaller size transfer and then let the edges show which is fun with the wood
pieces.
There's another piece of wood with a transfer on it
and here we put a transfer sheet in the bottom of a bezel setting
and put resin over the top.
So how do we do this. How do we get our transfers on to our settings.
First you need to gather your supplies.
You're going definitely need a little bowl of room temperature water. You're going to need a paint
brush.
Sealant or varnish.
You're going to need scissors to go ahead and cut out your transfer image.
You can also use punches if you're using the Patera
settings. We have punches which are available. They exactly fit them.
You going to need a pair of tweezers
and you're going to need a cloth.
So you're going to want to pick out the transfer you're going to want to use and they come in sheets like
this.
What's really nice about that is that on the back
it has all the instructions you're going to need you can refer to this video or you could go
ahead and use the instruction sheet. There's very good in detail and it'll walk you
step-by-step through how to do it.
Make sure that you are purchasing a transfer sheet and not a collage sheet.
They actually look identical but
they are very different.
The collage sheet has a solid white back on it
and the transfer sheet
has a special adhesive back on it which is gonna come off.
Alright we're all set up with our supplies I've got a transfer sheet here. As you can tell
it's been well used
and I'm going to take this image here. There is a hole punch specifically for that heart shape
and I've already went ahead and punched it. You can also cut it with a pair of scissors.
So once you have that shape cut out
what you're going to do is you're going to take your pair of tweezers. You're gonna go ahead and submerge
the entire image
in the water.
You can probably tell it curls up that's totally fine.
You're going to let that sit there for about a minute.
Alright it's been a minute and now we're gonna go ahead and take our pair of tweezers pull
our image out of our water
set it down onto a dry cloth.
Go ahead and gently dab it so that you get some of the excess water out.
You can probably tell it is already peeling away from its backing.
Go ahead and just slide it off.
You can discard the backing
and then we're gonna
carefully
place this. We have a little bit of wiggle room.
Down into our setting
and then take your finger
smooth it out.
You can probably tell that what was white
is now clear and so your
bezel setting showing through whatever color that may be.
Ours is silver so I like that against the black.
Okay so that actually adhered it to your setting but you're going to want to seal
it.
And to seal it, we're gonna take our sealant
and we're gonna wait a few moments just for that too dry. It is actually pretty dry ready but
we don't want any water in there.
We're just going to dab
my paint brush
and I'm going to paint a thin layer of my sealant over the top
making sure to get into edges.
Let that dry.
And now we can either go ahead and put findings on top of it, we can seal it with
resin, we can do what ever we like.
Now if you are going to go ahead and use the word transfer you would use it the exact
same way.
You would go ahead and cut them out of your transfer sheet. Cut as close to the letter as
possible
and then go ahead and put them directly on top of
whatever paper you have below them cause that paper's then gonna go ahead and show through.
Then you would just go ahead seal it the same way you did the other transfer sheets.
Transfer sheets are a lot of fun. There's a lot of different uses for that.
Enjoy. Just make sure that you're buying transfer sheets not collage sheets and remember that whatever
is the white on the transfer sheet is going to be clear and if it's a light backing on
the transfer sheet
it's going to
fade into the background of your settings. Just keep those tips in mind and have fun.
Go to Beadaholique.com for all of your beading supplies needs!