Hi everyone I am Dennis Foley from acoustic fields.
Today we are going to look at our DIY product.
This is the diffuser kit.
It is a new product of ours.
We will show you the pieces the kit comes with then we will show you how to assemble
it, step by step.
This is the back piece you can see that it has all the dados in it for each piece.
It is going to go on.
So this is the back piece, and you want to check your kit when you get it to make sure
that this is included.
Okay, here are the top and bottom pieces and you can see the dates for the diffuser slats
in those pieces also.
So make sure you have the back piece like we just discussed and then the top and bottom
piece as you see here.
Here we have the 5 center slats that are going into the back and top and bottom which we
just looked at.
We want to make sure the kit has the 5 vertical slats to go in it.
Alright, in this we have our 4 horizontal slats that are going to be different depths
and different blocks underneath.
You should have 4 of these pieces and 12 of the supporting blocks.
So make sure your kit includes all these pieces and then the next step would be to assemble
which we will show you shortly.
Here we have our back piece, and Carl's installing the vertical dividers into the dates that
the back piece has as you can see.
There's 5, so he's inserting those into those, step by step.
Real easy to do, of course you have your glue in there and that would hold it.
And then we have one more here.
So you can see all 5 dividers now in the back piece, and we will have to let those dry for
a while.
Here we go with the top and bottom piece.
Carl's going to start with the top.
And he's going to put that on next.
It is all dadoed, out, it is really easy to do, all you have to do is slide it on like
he's going.
See how nice that fits together?
This is an easy build.
No screws, just a little bit of glue and patience.
Okay.
Good.
Now Carl's going to put the side pieces on now, he has them cut perfectly so they fit
right on there.
How easy is that?
Side pieces on the other side, obviously we will glue them, but we are giving you an idea
of how to assemble it so you know what to do here.
Okay, good.
So we have now the bottom, the back pieces with the data with the vertical slots in it.
And all the borders, the 2 sides and the 2 tops.
Okay, you can see here that we have put the clamp on the end to hold everything together.
Now Carl's going to go ahead and insert the horizontal pieces.
These are our well dividers, these are the different depths which give us our different
frequencies of diffusion.
Remember our blocks to raise the horizontal well dividers.
Carls going to insert those in the proper position.
These are going to hold our actual well dividers.
So you just simply insert them obviously you would glue them, but we are doing a dry fit
today so you can get a handle on it.
Our first well depth is at the one inch mark.
So Carl has inserted those blocks.
Now he's going to insert the smaller ones in the middle.
And these are already preset, so you do not have to do any measuring, just get them in
there, insert them in there.
We have already measured, done all the work for you, all you have to do is get them in
the right spot.
And then Carl will now insert the actual well dividers and there's 4 four of those.
I am sorry, 6 of those.
No, 4, because we have two open, that's right.
Take your time.
And there you go.
There's your diffuser based on prime number 7 and all the parts fit nicely together.
Obviously we need to glue them and hold it, but this gives you the idea how easy the kit
is to assemble.
Everything is precut, everything is pre measured, and all you have to do is assemble it using
this quick and easy process.
Thank you.