[AUDIO LOGO]
Hi DIYers.
This is Michael, from AlarmGrid.
And today, I'm going to be showing you
how to remove or clear a Z-wave device from your Honeywell Home
PROA7PLUS security system.
This also applies to the other ProSeries alarm panels.
And you will only really be removing a Z-Wave device,
if you have a Z-Wave card installed inside the system,
which is the PROWIFIZW.
That comes by default on the PROA7PLUS
and the residual PROA7PLUS C. If you have a PROA7PLUS
from Honeywell Home or a residual PROA7PLUS C,
then you'll need to add a PROWIFIZW,
because those systems, they don't come
with that module preinstalled.
So just something to keep in mind.
But clearing a Z-Wave device--
this is also something you'll do when adding a Z-Wave device,
because clearing a Z-Wave device wipes
out all of its Z-Wave network data, which
helps for enrollment, makes it able to be enrolled.
So you will do this before adding a device,
but you might also be doing it if you just
want to clear out a Z-Wave device,
if you no longer want to be using it with that system.
You don't want it to show up on the system.
You don't want it to show up on Total Connect 2.0,
because the devices--
when you enroll the Z-Wave device with this system,
if it's monitored with access to a Total Connect 2.0,
it gets pushed over to that platform as well.
So we're going to be showing you how to clear a Z-Wave device.
And we have a couple of Z-Wave devices enrolled
with the system already, and we'll be clearing them both.
So we're at the main screen of our PROA7PLUS,
or Honeywell Home PROA7PLUS.
We're going to click the small hamburger button, the three
horizontal bars at the bottom.
And we're going to choose Devices,
and we're going to choose Z-Wave Management.
And then, we can use our installer code or our master
code.
We'll use our installer code this time,
which our default of 4112.
And then we're at the Z-Wave management menu.
So I'm going to show you that we have some devices enrolled
right now.
We have a couple of lighting modules.
We have just an on/off regular lighting module,
and then we have a dimmer as well.
So we're going to be clearing both of these from the system.
We'll do it one at a time.
So we're going to go to Exclusion Mode.
And then we have our Z-Wave devices down here.
Actually, we have a couple of them.
And the way that these include or exclude,
we just press a button.
If you have a different Z-Wave device, maybe a Z-Wave lock,
you might have to enter in a specific code
or follow a sequence of commands to do inclusion/exclusion.
So refer to the manual for your Z-Wave device,
if it follows a different process.
Just a helpful tip there.
But these are pretty simple.
So we're just going to press the button on our Leviton device,
and you see that we have excluded
the device from the network.
So now, we're just going to choose Done.
And then, let me show the Enrolled Devices screen.
We're going to see that now we only have
one Z-Wave device in there.
We've cleared this one out.
So let's go ahead and clear the other.
We're just going to go into Exclusion,
and we just press the button our Qolsys dimmer module.
And you see that it is cleared from the network.
And we're going to go back in into enrolled devices
and see that everything has been wiped out.
It's important to note that we've
wiped out the Z-Wave network data for these devices,
so they can be readily enrolled with a new Z-Wave controller,
or the same Z-Wave controller.
In fact, I'll do that just to show you.
If we wanted to add the Z-Wave device in,
we could go to Inclusion Mode.
And now it's listening for a Z-Wave device to enroll.
We'll enroll our Leviton module here.
We press the button.
Seems you have to do it a couple of times to get it to show up.
And you see it does say, device found.
It's got the device on there.
And it's been added to node number 15.
It's the Leviton.
And it's just a switch.
It's non-secured, meaning that this
is the low-level, old-style Z-Wave security, S0,
so to speak.
Like I said, this is a Z-Wave classic device,
so it doesn't have a high level of security.
It's a low level security, but that's fine for most automation
devices.
But if we go into our Enrolled Devices,
you see we have our device here.
Right now, it's on.
You see the LED is on.
If we were to press the button, then we can control it.
If you listen closely, you might hear a slight click.
[CLICK]
Yep.
So we can control the device from there,
and we can also control it from Total Connect 2.0.
The devices get pushed over to that platform as well.
But let's go back out to the main screen.
We're pretty much done here.
So that is how you remove a Z-Wave device
from your Honeywell Home PROA7PLUS security system.
If you don't want to have your Z-Wave device on there anymore
and you want to use it with a different controller,
a different network, then this is
something you would do to get it off
of your Honeywell Home PROA7PLUS,
or other ProSeries alarm panel.
So, if you have any questions about Z-Wave devices,
about the Honeywell Home PROA7PLUS,
or about alarm monitoring services,
send an email to support@alarmgrid.com.
If you found this video helpful, make
sure to give it a thumbs up below, to like the video.
And remember to subscribe to our channel for updates
on future videos.
We hope you enjoyed the video.
Thank you.