hello everyone welcome Easy Steps today
I'm gonna be showing you how to replace
your cracked LCD digitizer on your
iPhone 6 plus so you're gonna be needing
as your new screen Phillips screwdriver
iPhone star screwdriver a pry tool
suction cup and a pair of tweezers so as
you can see my LCD is cracked so to get
started you're gonna open the two screws
at the bottom of the phone one two so
after removing the two screws were you
gonna do is get your suction cup lift it
from the left side of the home screen
after suction cup doesn't work we could
do is just get your pry tool and you can
slowly pry up the back like that and pry
along all the edges and open it
and slowly open it like that
so next step is you are
going to remove the five screws one two
three four and five
after removing the screws you're going
to want to slowly pick up the metal
plate and now you're going to remove the
connectors one two three and four
connectors next you're going to want to
open six screws there's one two and
three and there's gonna be three on the
other side also it's for the shield
after removing the six screws where
you're gonna want to do there's gonna be
two screws for the home button shield
one to the screw for the metal shield
here to remove the home button you're
gonna open the flex cable near the
connector and next you're gonna slowly
push the home button from the back side
keep that very slowly lift it up slowly
lift it up at the top there is going to
be four screws one for the metal shield
right here and then there's going to be
one two three and these three are for
the earpiece and camera the metal shield
will lift right up and to move the
front camera and earpiece
we lift your shield up from the top and
you're going to slowly want to remove
the connector for the home button right
here
is get your new screen assembly you
don't want to set your metal shield
press down the connector and reattach
the glue now you're going to want to
install the camera and sensor back in
put the metal shield back on after
installing the shield here you're gonna
be install the screw on top of the metal
shield at the bottom and the six on the
sides after installing the screws we're
going to install the home button press
it down so the glue gets flat and we
connect the connector I'm gonna put the
shield back on and now we're going to
install the new LCD into our iPhone
there's gonna be four connectors you're
gonna want to press up four after
connecting connectors just make sure you
screen is working also your camera and
your home button so now you're gonna take
the metal shield
you're gonna reinstall all five screws
the five screws you don't want to close
your screen you're gonna slowly press
your screen and lock it into place
and you're gonna want to reinstall the
two screws
so that's how you place your cracked LCD
digitizer on your iPhone six-plus that
this video has helped you in any way
don't forget to hit the like and
subscribe button thank you