Hello, assalamualaikum warahmatullah barakatuh, see you again with the Black Builder channel. In
this video, we will have a tutorial on finishing applications using products
from biovarnish and for the products from biovarnish that I use, there are three elements
, the first is the fulfiller, so muscular, this is generally referred to as wood putty.
so its function is to cover the pores of the wood so that later our finishing results are maximally
erased and flat then after being hit by the wood we will apply it Ustad so
Ustad this is the wood dye, there are various colors, friends, you can choose and buy at
several online stores or immediately sold it in Jogja then the last one is the
top layer is a bit clear code and there are two types, one can be matte and gloss so for
this video I will use uttwiler which is Ramin color then goodstein which is yellow oxide
Then to clear the strength of the blouse and for wood media that I will finish ing is
Dutch teak, yes, for the biovarnish product itself, it does display transparent results,
yes, with various color elements, and indeed, biopharmaceuticals try to be suitable for
those that have beautiful fibers, such as sonokeling wood, Dutch teak,
trembesi wood and others. Currently it is very popular too, yes,
for transparent finishing, because indeed by showing the beauty of the wood,
it
makes the furniture or work we make high for its selling value
. very important before we do the coloring, the first one is for the wood, we
have to make sure the water content contained in like this is below 12 percent, we can
check by making Moscow m and why do we have to pay attention to the water content
because if that time is still forced it will cause clock ur and cracks after the
finishing process and then is we have to flatten and smooth the wood we can use
the Bible Flashlight then we Sandy and we or we sand it until it's really smooth and even
and finally before we find it apply wood filler we have to clean it first
so don't until there are impurities left over from the refinement, I think, because it
will greatly affect the results of the finishing, we are doing so in this experiment
, this is Dutch teak, I will grind it first, and we will act
yes. Ah, this is for the wood that we will use for the tutorial, so we We have used Dutch teak
like this before, we have smoothed it and said we also used an sanding machine for the great 120 so
before we start make sure it is smooth and even. Then before we start the
Wood filler application we have to make sure that the mating surface is free of dust, dirt and oil and
other impurities yes There is a cover for your application filler for comparison, it's two to
one, we combine it with water, yes. After that we stir and for the application technique we
can use a palette knife or a special knife to assemble then we can use
bed linen and we can use a damaged brush either we will start for the application of the grains
hi okay ok, this is for the wood filler which is Ramen color which we will use and this is
the palette knife, let's open it first. Only the film is exorbitant and hey hey
Ndan we can use a 1 to 0/2 to 1 composition, uh, for the water and for
this experiment, let's do this We don't use water, so we just use the wood filler.
Oh yes, this is for the wood filler color. Amen, yes, the color is yellowish like this, so
before we use it, we stir it first. Well, try to stir it a little before we apply it to the media,
so it's stirred until it forms like this, so when it's like this we will be ready to
apply it, apply it to the media of teak Bel you feel good, that's enough. Let
's apply it, so for the application, try to amend the pulse in the direction of the wood grain.
Hi, it's in the direction of the wood grain. Make sure it's evenly distributed and smooth, weakly evenly distributed over the entire surface of the
wood. Yes, so for
the drying process, the blunt results should not be directly exposed to the sun's trick, yes or the hot
sun, we should do the finishing in a room that is not directly exposed to the sun
because a lot if we dry it with sun exposure, the result is fixed
and that means the moon is right. it becomes unsuccessful or unsuccessful, yes and don't forget
also for the humidity of the environmental air that we use during the finishing process with biovarnish
, it is a maximum of 30% of the land for long humidity because if it is our environment is humid
or the air is humid it will actually damage the layer of Glumbul layer state and the Coating layer
is Sagita M sorry for today's application, yes, it's been 30 minutes and the results are dull.
Hey, it's like this, so after this the process is we sand it, we use
great 240 sandpaper, we can use manual sandpaper or orbital Sanders, yes, we try to upload it,
hey, hi, so sit down sanding, namely sandpaper. until it's finished so
until we regret the dust, it's only allowed, we've continued
hi hi hi hi hi smile 2 Hi but really hi hi hi hi 2006 at
Oh yeah So this is after we sanded it so sandpaper until it runs out until the skin dough
leaves only what is filled for pores For example, the part of Fakfak
Wan where the holes are filled with uttwiler then after this we can
apply twice or three times for filler But because I gave of Glory it was
too much or immunity so I think one is enough only once. So, apart from directly
applying it for the output, let's just apply thanks for the design nyelow oxide ya
hi hi hi the mujse I use here is yellow oxide color and
in this experiment I used a composition of 2 to 12 for the website
and one for the water here I use 100 ml of osteen
and I will mix it with as much water as possible. 50 ml so that the composition is
perfect. After that, we stir until the color of the paint is homogeneous and perfectly mixed.
Oh yes, if it is enough, we can directly apply it to the Dutch teak media. In
this
experiment, I used a phone brush because in my opinion the results were more optimal .
slowly on the entire surface of the Dutch teak wood and if
it is enough we wait for it to dry for about 30 minutes and when it is dry
here we can apply it twice.
Hi far After First, we clean the surface before we apply the second gel, the
method is the same as the first method, but before we apply it don't forget to stir it first and we
apply it again to the entire surface of the Dutch teak wood and after that we wait for it to dry for
about 60 minutes for the operation. Don't let it be too
strong because it can damage the paint layer and this is the third application we will do
as usual, we sandpaper using Grid 400 all over the wood surface, after that
clean it from the remnants of the sandpaper and we stir again the chat and then we
apply it again to the surface. the entire surface of the wood Hi in this third process I see the results
are better and of course we are ready for the next process, namely the application of clearcoat
for the clear coat I chose I used a gloss one to display a shiny result
Hi but before we apply the klipot we have to do a sandpaper
so that the clear chord layer sticks perfectly
Hi and for the comparison of the clear chord itself, we use two to one
clear coat, finally one and then stir until homogeneous
.
you can apply it to the surface of the Dutch teak wood that we have given Western here
I am also still using the phone brush because again for the results it is more even
and neater I think do it slowly to all surfaces of Dutch teak
Hi and for this clear coat application we can do it once or twice, yes, but
if one time is enough for what we want, we only need to do it once
.
if
we want to apply clear the second coat Don't forget to sand again with great 400 and
after that we apply the clear coat again and we wait for it to dry for about 60 minutes
, the results of our experiment and tutorial so we applied bluntly once, namely the pilot
once. Then for the handlebars, I did it three times Then for the topcort,
I did it twice. So, for the results like this, to take it off, I bought an
old one, so the color has increased shine like this. Try to pay attention.
Hey, it's like this and for the medium color, it's yslow oxide, so the color is like this
. indeed the results are smooth, so for drying after topcort it is for
frying, touch it for 20 minutes. But if we want to get the maximum cream
that is ready for packing or we send it, it should be the night Worship center and
that's why the results will be even more visible and we can see what will the perfect result
look like? I hope it's
useful, more or less, I'm sorry, don't forget to subscribe, like and share and
call intentionally so you don't miss our next videos, see you on
hi hi hi hi