Today we're showing you how to properly assemble the AMC-600-2 Motorcycle Carrier from Rage
Powersports.
Carrier frames come locked together with the ramp.
To separate the carrier frames pull apart opposite of each other to unlock from the
ramp.
Parts for assembly include Carrier Frames, Loading Ramp, Main Hitch Tube, Support Brackets,
8 1/2” Bolts and Lock Nuts, 1 3/4” Bolts, Washers and Lock Nuts, 1” Bolts and Lock
Nuts, Ramp Storage Bolts, Nuts and Wing Nuts
Parts needed for Step 1 include Main Hitch Tube, Support Brackets and 1” Bolts and
Lock Nuts.
To begin, secure Support Bracket to the outside of the Main Hitch Tube mounting tabs using
1” bolts and Lock Nuts.
At this point keep bolts only finger tight.
Repeat this process for the next 3 Support Brackets.
Parts needed for step 2 include Carrier Frames, 1 3/4” bolts, Washers and Lock Nuts
Place the Carrier Frame between the Support Brackets and align the mounting holes.
Secure using 1 3/4” Bolts, Washers and Lock Nuts
Repeat this process for the next Carrier Frame
Now, fully tighten ALL bolts, including the bolts from the previous step
Parts needed for step 3 include Loading Ramp, 8 1/2” Bolts and Lock Nuts, Ramp Storage
Bolts, Nuts and Wing Nuts
To secure the Loading Ramp to the Carrier Frame, install the Ramp Storage Bolts.
Once installed the Loading Ramp mounts to the Carrier with two Ramp Storage wing nuts.
The optional 8 1/2” Wheel Adapter bolt can be installed to make the front wheel gap shorter
so the carrier can be used with smaller motorcycles.
Thank you for watching this demonstration video on how to properly assemble the AMC-600-2
Motorcycle Carrier from Rage Powersports.