[SLAM] Hey, DIYers.
Jarret with Alarm Grid here.
Today, we're going to be discussing
how you would test the Honeywell 5808W3 with the Qolsys IQ Panel
2 Plus.
Now, the 5808W3, it is able to be tested
with two different methods.
You can either test it by using the test button, which
is actually located directly in the front of the smoke
detector.
Or you can use a thing of canned smoke or a hairdryer
to be able to test the heat detection on the system.
Now, of course, if you ever did want
to run any tests with these smoke
detectors before any alarm system
or the Qolsys IQ Panel 2 Plus in general,
you want to make sure that your account or your system
is in test mode before you do so,
so that you do avoid any type of false alarms
or any type of issues when it comes
to any fees that may follow a false alarm
or anything like that.
Now, because this is a fire safety device,
you do want to make sure that you are testing the smoke
detector at least twice a year to make sure that everything
is working correctly.
So when you are performing the different tests for the smoke
detector, there's going to be two different types of tests
that you can perform.
There's either the transmission path test,
which is by basically pressing the test button located
at the front of the smoke detector.
Or by triggering a functional test, which is basically
activating the actual sensor that's
inside of the smoke detector.
And that'll be done by either using the canned smoke
or using the hairdryer to be able to activate the sensor.
Now, if either of those tests fail,
then your best option is to either try
to troubleshoot that smoke detector to make sure
that you can get it to work.
And if not, then you would have to replace it with the new one.
Again, you do want to perform these test at least two times
a year so that you can make sure this is functioning correctly.
Now, if you are enrolling the 5808W3 into your Qolsys IQ
Panel 2 Plus, you definitely want
to make sure that the Qolsys panel you have
is the correct version.
You have to make sure that your Qolsys IQ Panel 2 Plus supports
legacy 345 megahertz.
That is because the Honeywell sensors or the 5808W3,
it does only support 345 megahertz to communicate.
But if you do have that type of system,
by all means that works perfect.
And if by any chance you are enrolling or having issues
enrolling the sensor into your panel,
there is a link in the description below of this video
so that you can check it out to be
able to assist you with that.
Now, of course, before you do any of these tests,
you 100% have to make sure that your system is in test mode
first.
So that you make sure that you avoid any type of issues
with setting off false alarms or maybe
even being fined for accidentally setting off
a false alarm.
So to avoid all this, definitely put your system in test mode.
Now, if you ever wanted to put your system in test mode,
you can either call your monitoring company
and have them place the system in test mode for you.
Or you can call the central monitoring station themselves
and have them place your system in test mode as well.
And if you were an Alarm Grid customer,
you can put the system in test mode yourself by going
or by using the MyAlarms.com feature.
Now, when you are performing the test,
obviously the first test you going to perform
is by checking the transmission path.
That is by pressing the test button
at the front of the sensor.
So performing the transmission path test
is basically just ensuring that the sensor is properly
communicating with the Qolsys IQ Panel 2 Plus.
It's also going to make sure that all the LEDs are working
and that the siren is working as well.
So when you're initially starting this test,
again you 100% want to put your system in the test mode,
and that is by calling your central station,
your central monitoring station directly,
or you can call your monitoring company.
Or again, if you were an Alarm Grid customer,
you can use the MyAlarms.com feature.
Once you have successfully put the system in a test mode,
then you perform the second step, which is basically
pressing this test button.
So what you'll do is--
what you'll need is basically a small thin object
like a screwdriver or maybe like a big pair
tweezers or a toothpick.
Something that can go into this little hole and you
can press it down for at least five seconds.
And once you're holding down that button,
it is going to trigger the alarm on the system
if you do have it enrolled correctly.
Now, if you don't have enrolled correctly,
then it's not going to set off the alarm and at that point
you'll know that it has not properly enrolled.
And then, the third step is just basically making
sure that it's working.
Once it has triggered the alarm, then you
can just disarm the system by using the master code.
Now, we're going to test.
So as I said, what you're going to do
is you're going to basically take a screwdriver,
and you're going to press the test
button for about five seconds.
And it's going to trigger the alarm on the Qolsys panel.
[BEEP]
So we have just successfully tested the transmission path
test that just ensured that the system is correctly
enrolled into the alarm system.
So now, we have done the first initial test for the 5808W3.
Now, the second test is a functional test.
So basically what we're going to be
doing is using the canned smoke, and also
if you wanted to use a hairdryer,
you can do that as well.
But as I said, then you first have
to put the system into test mode again or just make sure
that it still is in test mode.
So again, if you wanted to call the central monitoring
station or the alarm company, you can definitely do all that.
And then, when you are ready to perform the functional
test, what you'll do is for the first test
you'd use the canned smoke.
Basically using the can smoke is just
ensuring that if there was ever any smoke going
or if there was smoke going through the smoke detector,
it will trigger the alarm.
And then, the second test is by using a hairdryer.
Now, for this video we're not going
to be using a hairdryer, because we don't have one
on hand to be able to test it.
But using the hairdryer is basically
just making sure that the heat sensor is working
for this smoke detector.
So if you wanted to use the hairdryer, what you'll do
is you'll look for this round hole right here.
It's going to be bigger than the test button.
It's actually going to be the opposite side of the test
button.
And what you do is you'll take the hairdryer,
and you'll put it basically in full heat.
And you're going to direct it towards this hole,
and you're going to let the heat go into there.
And once this sensor picks up about 135 degrees Fahrenheit,
it's going to trigger the alarm.
And at least you'll know at that point
that the heat detection is working.
And of course, once that's done, you'll
just disarm the system by using the master code.
But for this video, we are going to test the smoke detector
by using the canned smoke.
So now, we're going to test out the canned smoke.
So what you definitely want to do
is make sure that the smoke is going directly
into the vents of the smoke detector.
[SPRAY]
And sometimes it can take a little bit to the trigger
the alarm, so just give it a little second.
[BEEP]
So as you can see, we have successfully set off the alarm,
or we've triggered the alarm on the smoke detector
by using the canned smoke.
And that is how you test the 5808W3 on the Qolsys IQ Panel 2
Plus.
If you have any questions about the 5808W3 or the Qolsys IQ
Panel 2 Plus, please contact us at support@alarmgrid.com
or go to our website, AlarmGrid.com.
If you found this video helpful, please like, subscribe.
If you want notifications of future videos,
please click the bell icon.
This is Jarret with Alarm Grid, you have yourself a great day.