Welcome to the Atlas Copco ToolsTalk Micro Torque tutorial series.
In this video we'll be showing you how to setup your TT MT software with your MicroTorque Focus controller.
We'll create a Pset, do some rundowns and check out all of our traces.
The first thing that we will do is connect our MT Focus controller via USB to our computer.
Then we will power on our controller
and open up ToolsTalk MT
Now that our controller is on
we will go into the software
Click on USB
and then click the connect button
We just get a message saying that time differs from our PC time, we'll hit OK
We will open up the Pset tab and we see a list of all the Psets we can set
Pset one is set in Red
The reason for that is that we created a Pset for a different tool than is connected now which is not compatible
I'll double click on that Pset to open it up
and across the top we get a message saying this Pset was configured for a tool type other than what we are using
We are using the ETD M200
instead of the ETD M 08
We can either edit the Pset and put in the values that work for us,
Or we can just click default Pset
I'll click default Pset to set it back to it's default values for this tool.
What we are going to be doing today is running down 7 different screws
on this hard drive right here, so I'll go ahead
and secure this hard drive
to the table
I've already loosened the screws
Perfect
In our software now we will make all the changes we want to our Pset
I want my torque target to be 100 cNm
it automatically changes our maximum torque to 108
that's ok
Our tightening speed is at 250 RPM
I like that as well
And I'll change the step type from Torque step to hard joint step
Since this is a hard joint
I'll allow it to be clockwise tightening, and we don't have a vacuum
setup so we don't need to worry about that
and then if I go under the global parameters over here
I can change what get's displayed on the actual controller itself
as well as some other things such as the batch size
We will change it from 1 to 7 since we have 7 screws on this hard drive
Just by hitting enter on your keyboard the changes will save, there is no store button on this program
Once we are happy with that we can close that out
I can open my controller preferences by double clicking on controller
and we can change the OK beep frequencies
and a whole bunch of other settings as well
everything looks good though
I'll leave it as is
If you did want to change your display units you can change them up here at the top
I like using cNm
Now we'll go up top and I'll open my trace monitor
We have 2 different windows that open up
The first is the large one that shows our trace values as they come through
and the second
shows us the current torque, the peak torque and the speed
live from the tool itself
You'll notice that program updates much faster than the other ToolsTalks
usually do
So let's get to work
I'll take my tool and begin my first rundown
100 cNm
The screen turns green to indicate that it's been
OK
and on our software we see a live update of our trace
And this is our 7th and final screw
and we get the blue screen saying Batch OK
and that is how easy it is to set up a Pset using ToolsTalk MT
and an MT focus controller
I hope you enjoyed this video
If you have any questions leave a comment below and we will get back to you
Thank you for watching
and be sure to subscribe for more product news and tutorials from Flexible Assembly